-
×
Norton 66261013403 - 3" X 1/2" Extra Coarse Grade Silicon Carbide Bear-Tex Rapid Strip TR Stripping Disc, 10 Each
20 × $8.36 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
60 × $4.62 -
×
Dynabrade 90874 2" Dia. Very Fine NWN DynaBrite Locking-Type Disc, 25/pack
25 × $1.89 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Norton 66261014921 - 2" X 1/8" 50 - 80 Grit Coarse Grade Aluminum Oxide Bear-Tex Speed-Lok Rapid Blend Gray TR Non-Woven Unified Wheel, 60 Each
60 × $6.67
-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
Dynabrade 78128 3" Dia. Coarse NWN VT DynaBrite Locking-Type Disc, 25/pack
25 × $4.18 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
Dynabrade 78595 3/8" Dia. x 1-1/2" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $0.61 -
×
Dynabrade 91069 1" Dia. x 1" W, 80 Grit, Z/A DynaCut Band, 10/pack
10 × $1.02 -
×
Dynabrade 92585 3-1/2" Dia. x Medium Hook-Face Surface Conditioning DynaBrite Disc, 10/pack
10 × $2.52 -
×
Standard Abrasives 727338, Zirconia Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 60, 7100102754
100 × $0.77 -
×
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
50 × $1.22 -
×
Dynabrade 78603 1/2" Dia. x 1" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $0.58
-
×
3M 19706, Scotch-Brite EXL Unitized Wheel, XL-UW, 2S Fine, 6 in x 1/4 in x 1 in, SPR 17773A, 7010366223
8 × $28.15
3M 08072, Hazard Marking Duct Tape Red/White 1125-RW, 1.88 in x 25 yd (48 mm x 22.8 m), 7100141147
This item has been Discontinued.
3M Hazard Marking Duct Tape Red/White 1125-RW, 1.88 in x 25 yd (48 mm x 22.8 m). Used for marking overhead safety hazards, safety lanes, and other hard to notice obstructions.
3M Hazard Marking tape is a general purpose poly scrim backed tape used for marking safety lanes on floors, overhead hazards, and other hard to notice obstructions. This tape comes in a red/white or black/yellow diagonal stripe format for multiple high visibility uses.
Related products
Deburring Wheels
Standard Abrasives 881110, A/O Unitized Wheel, 811, 2 in x 1/4 in x 1/4 in, 7010367104
$6.86
