-
×
3M 08369, MSP Seam Sealer, White, 310 mL Flexpack, 7000045483, 6 per case
6 × $34.88 -
×
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
60 × $10.08 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
Standard Abrasives 853299, Quick Change TR S/C Unitized Wheel, 532, 2 in x 1/4 in, 7010294934
10 × $5.34 -
×
Standard Abrasives 727094, Surface Conditioning Band, 1-1/2 in x 1-1/2in VFN, 7010368749
10 × $11.20 -
×
Dynabrade 78318 2" Dia. x 1" W x 1/4" Shank, Very Fine, NWN DynaBrite Wheel, 10/pack
10 × $12.50 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
Standard Abrasives 727093, Surface Conditioning Band, 1-1/2 in x 1-1/2 in MED, 7010301251
10 × $11.20 -
×
3M 84164, Hookit Microfinishing Film Disc 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7100015070, 500 ea/Case
500 × $1.22 -
×
Standard Abrasives 840138,Quick Change Surface Conditioning GP Disc, Medium, TSM, 1 in, 7000121649, 50 per case
50 × $0.86 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
Dynabrade 78387 4-1/2" Dia. x 7/8" Center Hole, Type 29, 60 Grit, A/O DynaCut Flap Disc, 10/pack
10 × $6.32 -
×
3M 26054, PPS Series 2.0 Adapter, Type S18, 3/8 Female, 18 Thread NPS,
4 per case
1 × $25.96 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
ACS Type 1, 4-1/2" X .250" X 5/8-11 Type 1 (Flat) 30 Grit, (*Eco-Dust/Debris Reduction)
1 × $45.00 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
3M 28214, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 2 in, Die R200P, 7010361116
200 × $1.40
3M 03851, Scotch High Performance Masking Tape 214, Tan, 1 in x 60 yd, 5.8 mil, 36/Case, 7000028847
$60.95
Factory Stock, 7-10 Day Leadtime
Scotch High Temperature Masking Tape 214 was designed specifically to be one of the few tapes that can be used on copper, silver and other metals. The heavy crepe paper backing is treated to provide excellent stain resistance, and the adhesive can be used on most treated metals due to the firmness of its adhesive. This tape has proven to not tarnish copper or brass, or stain metals.
Top-Notch Performance on Treated Metals in High Heat
Scotch® High Temperature Masking Tape 214 has proven to perform very well in high heat applications, and on stain sensitive surfaces including copper, silver, other metals, and white paints. It generally removes cleanly following bake cycles up to 350°F/ 177°C for 30 minutes. The crepe paper backing tears easily, and offers moderate conformability, and lifts off cleanly. The synthetic rubber adhesive also bonds well to paper, metal, wood, and painted surfaces to resist lifting and curling. Under normal operating conditions, the tape features one-piece removal and is sliver resistant.
Recommended Applications
- Applications involving sensitive metals and delicate surfaces
- High temperature bake cycles
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
