-
×
3M 99352, Scotch-Weld Structural Plastic Adhesive DP8005, Black, 45 mLDuo-Pak, 7100089475, 12/case
12 × $58.25 -
×
3M 54256, Cubitron II Roloc Durable Edge Disc 947A, 80+, X-weight, TR, Maroon, 2 in, Die R200P, 7100076925, 200 per case
400 × $1.33 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 28817, STIKIT LOW PROFILE DISC PAD, EXTRA FIRM, 5 IN X 3/8 IN X 5/16 IN, 24 EXTERNAL, 7010361145
10 × $26.24 -
×
3M 97061, Cartridge Roll 341D, P240 X-weight, 1/2 in x 1-1/2 in x 1/8 in, 7010363830
200 × $0.81 -
×
3M 14276 Scotch-Brite Surface Conditioning Belt, 1/4 in x 18 in, A MED, 7000120687
40 × $3.30 -
×
3M 14345, Marine Adhesive Sealant 4000 UV, Black, 3 oz Tube, 7010367954, 6/Case
6 × $15.34 -
×
3M 86802, Cubitron II Stikit Film Disc 775L, 80+, 5 in x NH, Linered w/Tab, Die 500X, 7100048736, 250 per case
250 × $1.11 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 20u
12 × $7.60 -
×
3M 81109, Microfinishing PSA Film Disc Roll 268L, 3 in x 7/8 in x 250, 30 Micron, Type D, Die 300M, 7100070631
4 × $111.23 -
×
3M 18081, Scotch-Brite Roloc SE Surface Conditioning Disc, SE-DR, A/O Coarse, 18081, 2714483, TR, 2 in, 7000046111, 200 per case
200 × $1.63 -
×
3M 02115, Paper Sheet 346U, 80 D-weight, 9 in x 11 in, 7000120220
500 × $0.94 -
×
Standard Abrasives 725005, Buff and Blend Cross Buff HS, A/O Medium, 1-1/2 in x 1/2 in x 3 Ply x 8-32, 7000046826
50 × $6.37 -
×
3M 60230, Scotch-Brite Hookit Cut and Polish Disc, CP-HA, A/O Medium, 5 in x NH, 7000121099
40 × $4.25 -
×
3M 91057, Scotch Restickable Mounting Squares R100S, 1 in x 1 in (2.54 cm x 2.54 cm) 18/pk, 7100245428
24 × $2.23 -
×
3M 80512, Roloc Disc 777F, TR, 2 in x NH, P120 YF-weight, 7000000553
200 × $1.08 -
×
3M 84158, Microfinishing PSA Film Disc 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7010360217, 500 per case
500 × $0.88
3M 31180, Platinum Plus Glaze, 30 fl oz, 7000045509
$55.84
Factory Stock, 7-10 Day Leadtime
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
