-
×
3M 54256, Cubitron II Roloc Durable Edge Disc 947A, 80+, X-weight, TR, Maroon, 2 in, Die R200P, 7100076925, 200 per case
200 × $1.33 -
×
3M 02432, Utility Cloth Sheet 011K, Medium, 9 in x 11 in, 7000118252
500 × $2.40 -
×
3M 87273, Cubitron II Hookit Clean Sanding Film Disc 775L, 220+, 3 in, Die 300DS, 7100106716, 250 per case
250 × $0.40 -
×
3M 86802, Cubitron II Stikit Film Disc 775L, 80+, 5 in x NH, Linered w/Tab, Die 500X, 7100048736, 250 per case
500 × $1.11 -
×
Standard Abrasives 725005, Buff and Blend Cross Buff HS, A/O Medium, 1-1/2 in x 1/2 in x 3 Ply x 8-32, 7000046826
50 × $6.37 -
×
3M 13254, Scotch-Brite Roloc Surface Conditioning Disc, SC-DS, A/O Medium, TS, 2 in, 7000120667, 200 per case
200 × $1.43 -
×
3M 18081, Scotch-Brite Roloc SE Surface Conditioning Disc, SE-DR, A/O Coarse, 18081, 2714483, TR, 2 in, 7000046111, 200 per case
200 × $1.63 -
×
3M 80512, Roloc Disc 777F, TR, 2 in x NH, P120 YF-weight, 7000000553
200 × $1.08 -
×
3M 97015, Cartridge RoII 341D, 3/8 in x 1-1/2 in x 1/8 in, P120 X-weight, 7010363828
100 × $0.65 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
400 × $1.25 -
×
3M 46902, No Residue Duct Tape 2420, 1.88 in x 20 yd (48 mm x 18.2 m), 7100270251
1 × $7.94 -
×
3M 18730, Scotch-Brite Roloc Bristle Disc, RD-ZB, 50, TR, Green, 2 in x 5/8 in, Tapered, 7000000742
40 × $9.65 -
×
3M 02115, Paper Sheet 346U, 80 D-weight, 9 in x 11 in, 7000120220
500 × $0.94 -
×
3M 34784, 663FC, 3" X 30", 20u, Trizact Diamond Belt, 7100063665
1 × $0.00
3M 31180, Platinum Plus Glaze, 30 fl oz, 7000045509
$55.84
Factory Stock, 7-10 Day Leadtime
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
