-
×
3M 13254, Scotch-Brite Roloc Surface Conditioning Disc, SC-DS, A/O Medium, TS, 2 in, 7000120667, 200 per case
200 × $1.43 -
×
3M 65083, Scotch Brite Roloc Deburr & Finish PRO Unitized Wheel, DP-UR, 6C Medium+, TR, 3 in x 1/4 in x NH, 7100081365
40 × $13.01 -
×
3M 70894, 641WY 1/2" X 24", 100 Mesh Diamond Cloth Belt, 7010533228
1 × $19.01 -
×
3M 27672, Scotch-Brite Surface Conditioning Disc, 4-1/2 in x NH A MED, 7000136523
10 × $3.26 -
×
3M 87273, Cubitron II Hookit Clean Sanding Film Disc 775L, 220+, 3 in, Die 300DS, 7100106716, 250 per case
500 × $0.40 -
×
3M 54142, Scotch-Brite, Roloc AL Surface Conditioning Disc TSM, 2 in x NH A MED, 7100075559, 200 per case
200 × $1.39 -
×
3M 55598, Hookit Clean Sanding Disc 236U, 5 in P80 C-weight, 7010029926
250 × $1.07 -
×
3M 66783, Cubitron II Roloc Fibre Disc 982C, 60+, TR, Red, 2 in, Die R200P, 7000118431, 200 per case
200 × $2.00 -
×
3M 55667, Stikit Film Disc 375L, P600, 5 in x NH, Die 500X, 7100063997, 250 per case
250 × $0.54 -
×
3M 05058, Cubitron II Hookit Clean Sanding Film Disc 775L, 400+, 5 in, Die 500LG, 7100145404, 250 per case
250 × $1.12 -
×
3M 54256, Cubitron II Roloc Durable Edge Disc 947A, 80+, X-weight, TR, Maroon, 2 in, Die R200P, 7100076925, 200 per case
200 × $1.33 -
×
3M 01004, Scotch-Weld EPX Mixing Nozzle, Helical White, 48.5 mL and 50 mL, 7100148766
72 × $3.14 -
×
3M 97251, FuII Tapered Cartridge RoII 341D, 3/8 in x 1-1/2 in x 1/8 in, P120 X-weight, 7010327463
100 × $1.11 -
×
3M 46902, No Residue Duct Tape 2420, 1.88 in x 20 yd (48 mm x 18.2 m), 7100270251
1 × $7.94 -
×
3M 02432, Utility Cloth Sheet 011K, Medium, 9 in x 11 in, 7000118252
250 × $2.40 -
×
3M 14270, Disc Pad Face Plate, 4-1/2 in Hard Black, 7000144144
1 × $17.76 -
×
3M 14725, Foam and Fabric Spray Adhesive 24, Orange, 16 fl oz Can (Net Wt 13.8 oz), 7100179450, 12/Case
12 × $9.49
3M 03180, Platinum Plus Glaze, 24 fl oz, 7000125055
$42.67
Discontinued, 3M Suggested Replacement
| 7000045509 |
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
Adhesives & Sealants
$9.49