-
×
3M 31959, 6450J, M125, 1" X 30", Type C, Pattern 18 Diamond Belts, 7100052712
1 × $0.00 -
×
3M 97061, Cartridge Roll 341D, P240 X-weight, 1/2 in x 1-1/2 in x 1/8 in, 7010363830
200 × $0.81 -
×
3M 80512, Roloc Disc 777F, TR, 2 in x NH, P120 YF-weight, 7000000553
200 × $1.08 -
×
3M 54142, Scotch-Brite, Roloc AL Surface Conditioning Disc TSM, 2 in x NH A MED, 7100075559, 200 per case
200 × $1.39 -
×
3M 47111, Cubitron II Hookit Clean Sanding Film Disc 775L, 320+, 3 in, Die 300DS, 7100145433, 250 per case
500 × $0.48 -
×
3M 86802, Cubitron II Stikit Film Disc 775L, 80+, 5 in x NH, Linered w/Tab, Die 500X, 7100048736, 250 per case
250 × $1.11 -
×
3M 64264, Cubitron II Hookit Clean Sanding Film Disc 775L, 180+, 5 in, Die 500LG, 7100064177, 250 per case
250 × $1.12 -
×
3M 14032, Cartridge Roll 341D, P120 X-weight, 1/2 in x 1-1/2 in x 1/8 in, Full Tapered, 7010327456
100 × $1.02 -
×
3M 14099, Scotch-Brite Surface Conditioning Disc, SC-DH, A/O Very Fine, 4-1/2 in x NH, 7000046017
50 × $3.25 -
×
Standard Abrasives 840458, Quick Change Buff and Blend HS Disc, Medium, TR, Blue, 3 in, Die Q300V, 7100074872, 25/case
25 × $3.71 -
×
3M 60230, Scotch-Brite Hookit Cut and Polish Disc, CP-HA, A/O Medium, 5 in x NH, 7000121099
40 × $4.25 -
×
3M 18081, Scotch-Brite Roloc SE Surface Conditioning Disc, SE-DR, A/O Coarse, 18081, 2714483, TR, 2 in, 7000046111, 200 per case
200 × $1.63 -
×
3M 91057, Scotch Restickable Mounting Squares R100S, 1 in x 1 in (2.54 cm x 2.54 cm) 18/pk, 7100245428
24 × $2.23 -
×
3M 07451, Scotch-Brite Surface Conditioning Disc, SC-DH, A/O Medium, 4 in x NH, 7000000652
100 × $3.34 -
×
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
36 × $23.31 -
×
3M 87103, Cloth Belt 341D, 24 X-weight, 9 in x 20 in, Fabri-lok, Single-flex, 7010326200, 20 per case
20 × $18.86
3M 03180, Platinum Plus Glaze, 24 fl oz, 7000125055
$42.67
Discontinued, 3M Suggested Replacement
| 7000045509 |
3M Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.
Related products
