When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Dynabrade 78080 2" W x 72" L Coarse NWN DynaBrite Belt, 10/pack
Dynabrade 82566 3/4" W x 18" L 120 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 14000 Dynafile Abrasive Belt Tool
Dynabrade 92192 2" W x 30" L 80 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 45257 Bushing, Throttle
Dynabrade 57744 - 6" Overskirt
Dynabrade 52986 3/8" Drill, .4 HP, Rear Exhaust, 500 RPM
Dynabrade 58067 Housing for Model 58503
Dynabrade 98061 End Plate
Dynabrade 01580 Felt Silencer
Dynabrade 97161 Hanger
Dynabrade 13531 Dynastraight 6" (152 mm) Extension Finishing Tool, 1 HP, Rear Exhaust, 1,800 RPM, 5/8"-11 Arbor
Dynabrade 58096 Drop-In Motor
Dynabrade 51078 Bearing
Dynabrade 53280 7" (180 mm) Dia. Right-Angle Grinder, 2.8 HP, 8,500 RPM, 5/8"-11 Spindle
Dynabrade 78116 3/4" W x 34" L Medium NWN DynaBrite Belt, 10/pack
Dynabrade 48207 .4 hp 7 Degree Offset Die Grinder, Rear Exhaust, 30,000 RPM, 1/4" Collet
Dynabrade 53060 3/8" Pistol Grip Drill, .7 HP, Rear Exhaust, 3,400 RPM
Dynabrade 52835 1/4" Drill, .4 HP, Rear Exhaust, 5,500 RPM
Dynabrade 61470 Raptor Vac Pneumatic Vacuum - Wall-Mount Style, 1.5 Gallon
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case 
