When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Dynabrade 79058 1/4" W x 24" L 80 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 93926 1-1/2" x 3-48 Female Center Thread, Very Fine, Dynabrite Surface Conditioning Eyelet Star, 50/pack
Dynabrade 79144 1/4" W x 24" L 40 Grit DynaCut Premium Ceramic Belt, 50/pack
Dynabrade 10689 Regulator-Lubricator, 1/2_ NPT Assembly
Dynabrade 57407 2-3/4" W x 8" L Dynaline Sander, Non-Vacuum with Clips
Dynabrade 02623 Gear
Dynabrade 54085 3/4" Dia. Mini-Dynorbital Disc Pad
Dynabrade 56205 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
Dynabrade 78007 1/2" W x 12" L Medium Non-Woven DynaBrite Belts, 10/pack
Dynabrade Nitro Series RB3 - Electric 5" Rotary Buffer
Dynabrade X3161H - 3" Mini Extreme & 6" Extreme Random Orbital Sander, with Hook Pad, Non Vac, Combo Kit 12,000 RPM, 3/16" Dia., Rear Exhaust
Dynabrade 56027 Muffler Insert
Dynabrade 78049 1/2" W x 24" L Coarse NWN DynaBrite Belt, 10/pack
Dynabrade 51078 Bearing
Dynabrade 64207 36" (91 cm) W x 72" (183 cm) L Downdraft Sanding Table, 230 V (AC)
Dynabrade 53037 1/4" Drill, .5 HP, Front Exhaust, 20,000 RPM
Dynabrade X62HS 6" Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, Hook Pad W/ Speed Regulator
Dynabrade X51 5" (127 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/16" Orbit, PSA
Dynabrade 79910 5" Dia. x 80 Grit A/O Non-Vacuum PSA DynaCut Disc, 100/Box
3M 62611, Scotch-Weld Threadlocker TL62, Red, 250 mL Bottle, 7100039195, 2/case 
