3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 19766, Utility Cloth Sheet 314D, 9 in x 11 in P240 J-weight, 7000000354
3M 30026, Hi-Tack Spray Adhesive 76, Clear, 24 fl oz Can (Net Wt 18.1 oz), 7000046589, 12/Case
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 26024, PPS Series 2.0 Spray Cup System Kit, Large (28 fl oz, 850mL), 200 Micron Filter, 7100134650
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
3M 43061, Aura Particulate Respirator 9205+, N95, 7100232940, 440 ea/Case
3M 54358, Particulate Respirator 8247, R95, with Nuisance Level, Organic Vapor Relief, 7000002060, 120 EA/Case
ACS Diamond Cloth Belt, CX1250 3" X 30" 45U
Standard Abrasives 713297, Aluminum Oxide Handy Roll, P120 J-weight, 2 in x 50 yd, 7100031623
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M 87429, Final Finishing Pads 10199NA4PK, 3 3/4 in x 6 in x 5/8 in, Replaces 0000 Steel Wool, 7100096075, 4 pads per pack
ACS 2" Diamond Roloc Disc, 100 Mesh, W/ Plastic Button
3M 06840, Booth Coating, 5 gal, 7000120531
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
3M 97967, Foam Fast Spray Adhesive 74 CA, Low VOC <25%, Clear, 24 fl oz Can (Net Wt 19.0 oz), 7100014108, 12/Case 
