3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
Dynabrade 51926 Vane Set (4pk)
ACS Diamond Cloth Belt, CX1250 3" X 90" 9U
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
Dynabrade 11005 Dynafile Belt Housing Guard
3M 16067, PPS Mix Ratio Insert - Generic, 3 oz, 7000119840, 10 Inserts Per Pack
3M 72003, Powerflow High Efficiency SP3 Particulate Filter System Component 450-01-01R20, 7000131701, 20 EA/Case
3M 80510, Roloc Disc 777F, P120 YF-weight, TR, 1 in, Die R100N, 7000045622
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
Dynabrade 78588 1/4" Dia. x 2" W x 1/8" Center Hole, 80 Grit, 100/pack
3M 41593, Polystyrene Foam Insulation Spray Adhesive 78, Clear, 24 fl oz Can (Net Wt 17.9 oz), 7000046590, 12/Case
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 91494, 8210 Particulate Respirator Display, 8210PB1-QP, 7010313631, 20 eaches/pack, 9packs/tray, 3 trays/display
3M 33501, Sanding Respirator, 03201, 7000120129, 2 per pack
3M 97967, Foam Fast Spray Adhesive 74 CA, Low VOC <25%, Clear, 24 fl oz Can (Net Wt 19.0 oz), 7100014108, 12/Case 
