3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
3M 07279, Polystyrene Foam Insulation Spray Adhesive 78, Inverted, Clear, 24 fl oz Can (Net Wt 17.9 oz), 7000046591, 12/Case
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 16205, PPS Disposable Lids, Midi, 125 Micron Full Diameter Filters, 7000120049
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
3M 49938, Roloc Disc 361F, 80 YF-weight, TSM, 2 in, Die RS200PM, 7000119019
ACS Diamond Cloth Belt, CX1250 3" X 90" 9U
3M 26578, Accuspray ONE Pro Spray Gun Kit for PPS Series 2.0, 7100158715
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 47838, EMI Copper Foil Shielding Tape 1181, 23 in x 18 yd (58.42 cm x 16.5 m), 7000058121
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 94534, SecureFit Full Brim Hard Hat H-804SFV-UV, Green, Vented, 4-Pt Pressure Diffusion Ratchet Suspension, with UVicator, 20 ea/CS, 7100240012
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
3M 66192, Particulate Respirator 8214, N95, with Faceseal and Nuisance Level, Organic Vapor Relief, 7000002083, 80 EA/Case
3M 17093, Versaflo Hood Assembly with Inner Collar and Premium Head Suspension S-655, 7000002347, 1 EA/Case
3M 87835, Scotch-Weld Epoxy Potting Compound DP270, Clear, 400 mL Duo-Pak, 7100077143,6/case 
