3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 88871, PSA Cloth Disc 777F, 60 YF-weight, 12 in x NH, Die 1200B, 7000120238
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
ACS Diamond Cloth Belt, CX1250 1/4" X 24" 75U
3M 30025, Pressure Sensitive Spray Adhesive 72, Blue, 24 fl oz Can (Net Wt 17.3 oz), 7000046588, 12/Case
3M 94498, X5-S4PTCS1 Standard 4 Point Chin Strap with buckle for SecureFit Safety Helmet, 7100207831
ACS 3" Diamond Roloc Disc, 120 Mesh, W/ Plastic Button
3M 20905, PSA Cloth Disc 348D, P180 X-weight, 2 in x NH, Die 200P, 7000118876
3M 76751, Roloc Disc 777F, 60 YF-weight, TS, 3 in, Die RS300V, 7010363900
3M 17083, Versaflo Hood with Integrated Head Suspension, S-433L-5, Medium/Large, 7000029981, 5 EA/Case
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
Dynabrade 95848 Dynabrade Gear Oil
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
3M 35825, Hookit Dust Extraction Flexible Sanding Block, 133 mm x 67 mm, 7100260505
3M 14559, Roloc Disc 361F, P150 XF-weight, TR, 2 in, Die R200P, 7000119021
ACS CX1250 Diamond Belt, 1/2" X 24" 20u
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M 54285, Particulate Respirator 8271, P95, 7000002047, 80 EA/Case
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M 50728, Hookit Purple+ Curved Adapter Set Multi Hole, 70 mm x 127 mm, 7000032209
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case 
