3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

Insize 4807, ANGLE GAGE SET, 6928640319341
3M 19766, Utility Cloth Sheet 314D, 9 in x 11 in P240 J-weight, 7000000354
3M 26710, PPS Series 2.0 Spray Cup System UV Kit, Standard (22 fl oz,
650 mL), 200 Micron Filter, 7100128902
3M 20360, Scotch-Weld Epoxy Adhesive 2216, Gray, Part B, 5 Gallon Drum (Pail), 7000046360
3M 91494, 8210 Particulate Respirator Display, 8210PB1-QP, 7010313631, 20 eaches/pack, 9packs/tray, 3 trays/display
3M 97421, Aluminum Foil Tape 3380, Silver, 72 mm x 45 m, 3.25 mil, 7010375681
3M 20909, PSA Cloth Disc 348D, 80 X-weight, 2 in x NH, Die 200P, 7000118873
ACS Diamond Cloth Belt, CX1250 1/2" X 72" 125U
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M 20932, PSA Cloth Disc 348D, 80 X-weight, 1 in x NH, Die 100N, 7000118914
3M 06506, Scotch Steel Gray Masking Paper, 06506, 6 in x 1000 ft, 6 per case, 7000045440
3M 51033, Roloc Disc 361F, 36 YF-weight, TSM, 3 in, Die RS300VM, 7000148150
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790
3M 36879, Self-Stick Liquid Protection Fabric, Blue, 28 in x 300 ft, 7100169496
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
Standard Abrasives 707195, Aluminum Oxide Handy Roll, P80 J-weight, 2 in x 50 yd, 7100031626
3M 80801, Scotch-Brite Combi-S Wheel, 3 in x 1-3/4 in 1/4 in Shank 80 X-weight, 7000077965, 10 per case
3M 10118, Synthetic Steel Wool Pads, 10118NA, #0 Fine, 7000126148
3M 08029, Marine Grade Silicone Sealant, Clear, 304 mL Cartridge, 7000120477, 12/Case 
