3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

Dynabrade 78469 2" Dia. x 1", 1/4-20 Female Center Thread, A/O, 60 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
3M 03601, Plastic Emblem and Trim Adhesive, 1 fl oz, 7010294867, 12 per case
3M 06524, Scotch Steel Gray Masking Paper, 06524, 24 in x 1000 ft, 1 per case, 7000045442
3M 10116, Synthetic Steel Wool Pads, 10116NA, #2 Medium, 2 in x 4 in, 7000047708
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
3M 45715, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 5 in x NH, D/F 5HL, Die 500FH, 7100113110
Standard Abrasives 42621, A/O Flap Wheel 621406, 1 in x 1 in x 1/4-20 in 80, 7010369106, 10 per case
3M 26325, PPS Series 2.0 Spray Cup System Kit, Large (28 fl oz, 850
mL), 125 Micron Filter, 7100134637
3M 54141, Particulate Welding Respirator 8212, N95 with Faceseal, 7000002027, 80 EA/Case
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
3M 06506, Scotch Steel Gray Masking Paper, 06506, 6 in x 1000 ft, 6 per case, 7000045440
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
3M 45713, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113145
Dynabrade 02084 Angle Housing Assembly,Steel, Rear Exhaust
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
3M 16000, PPS Lid & Liner Kit, Standard (22 fl oz), 200 Micron Filter,
50 Lids & Liners per kit, 7010029840
STANDARD ABRASIVES 840030, HOOK AND LOOP DISC PAD, 3 IN X 1/4 IN SHANK, 7010330497
3M 26585, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Clear, 1.8 mm, 7100152955 
