3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 50010, VentureClad Insulation Jacketing Tape 1577CW-WME, White, 99 mm x 13.7 m, 7010379907
Standard Abrasives 42679, A/O Flexible Flap Wheel 613126, 2 in x 1/2 in x 1/4 in 80, 7100033337, 10 per case
Standard Abrasives 42636, A/O Flap Wheel 622405, 1-1/2 in x 1 in x 1/4 in 60, 7010369111, 10 per case
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
Insize 7332, SPINDLE LIFT KNOB, 6928640312649
3M 88892, PSA Cloth Disc 348D, 60 X-weight, 15 in x NH, Die 1500A, 7010360718
Dynabrade 78466 2" Dia. x 3/4", 8-32 Female Center Thread, A/O, 80 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
ACS Diamond Cloth Belt, CX1250 1/4" X 24" 75U
3M 54358, Particulate Respirator 8247, R95, with Nuisance Level, Organic Vapor Relief, 7000002060, 120 EA/Case
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
3M 45709, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 6 in x NH, Die 600Z, 7100113080
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 50730, PPS UV Standard Lid & Liner Kit, Standard (22 fl oz, 650
mL), 125 Micron Filters, 7100067511
3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 07189, Particulate Welding Respirator 8515/07189(AAD), N95, 7000002112, 80 EA/Case
3M 80801, Scotch-Brite Combi-S Wheel, 3 in x 1-3/4 in 1/4 in Shank 80 X-weight, 7000077965, 10 per case
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 16314, PPS Lid & Liner Kit, Mini (6 fl oz), 125 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7000045487
3M 03601, Plastic Emblem and Trim Adhesive, 1 fl oz, 7010294867, 12 per case
3M 87147, PSA Cloth Disc 777F, 5 x NH, 36 YF-weightt, 7010308524
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
3M 77512, Cloth Belt 777F, 60 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010307736, 200 per case
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 16585, Accuspray Atomizing Head, Clear, 1.8 mm, 7100078990 
