3M™ Clear Super Silicone Seal is excellent for general purpose bonding and sealing, as well as formed-in-place gasketing applications. It will adhere to most clean, bare, or painted metal surfaces, glass, non-oily wood, abraded rubber, and many plastics.The versatility of this silicone makes it a practical choice throughout a vehicle.
A Tough Sealant for Real Life Conditions
Our silicone seal exhibits excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. For applications requiring exceptional adhesion, select our Clear Super Silicone Seal as opposed to a general purpose adhesive. The normal vibration that a car goes through on a bumpy road can take a toll on lesser adhesives. Plus, the temperature extremes of blistering hot summer days or frigid cold winter weather can stress adhesives. Exposure to rain, snow and sleet also tests the bonding strength of an adhesive. Fortunately, 3M™ Clear Super Silicone Seal is formulated to hold up when exposed to these conditions.
Directions for Use
Thoroughly clean surfaces to be bonded. Rubber surfaces should be abraded and wiped clean. Apply product to area that is to be sealed or bonded. The paste-like consistency makes it easy to tool with a spatula or wooden paddle. Super Silicones cure from the outside in. At conditions of 75°F and 50% RH, they form a tack free skin within 20 minutes. Tooling is not practical after the skin begins forming. Cure time is affected by humidity, degree of confinement, and thickness of the adhesive/sealant bead. Lower humidity and/or temperature will extend the cure time. Higher humidity and/or temperature will reduce the cure time. In applications where the adhesive/sealant is confined during cure, the time required for proper cure is generally lengthened.
Typical Applications
- Sealing automotive trim
- Sealing drip rails
- Sealing taillight and sunroof assemblies
- Filleting and caulking joints to provide a water and dust barrier
- Sealing vinyl roof top fabrics

3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
ACS 1/2 in x 18 in Diamond Metal Bond Belt, 120M/125u
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
3M 05479, Cubitron II Cloth Belt 981F, 1/2 x 24 in, 36+, YF-weight, Fabri-lok, 7100163424, 200 per case
3M 55065, Cubitron II Cloth Belt 984F, 36+ YF-weight, 3/4 in x 20-1/2 in, Fabri-lok, Single-flex, 7000148169, 200 per case
3M 94702, Cubitron ll Cloth Belt 947A, 120+ X-weight, 1/4 in x 24 in, Fabri-lok, Single-flex, 7100141686, 200 per case
3M 94738, Cubitron ll Cloth Belt 947A, 120+ X-weight, 6 in x 48 in, Film-lok, Single-flex, 7010299911, 20 per case
Standard Abrasives 32905, PSA A/O Disc, 706487, 1 in x NH, 120, 7010331819
3M 07148, Dual Airline Back-Mounted Breathing Tube SA-2500/07148(AAD), 7000002006, 1 EA/Case
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915 
