- Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication.
- Conformable to for intricate shapes and contours.
- Provide consistent rate of cut, wearing away continuously exposing fresh abrasives.
Abrasive Specifications
Mfr. Part # 78770
| Abrasive Category | Non Woven Abrasives |
|---|---|
| Abrasive Diameter [inches] | 3″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Wheels |
| Diameter [inches] | 3″ |
| Abrasive Sub Shape | Flap Wheel |
| Abrasive Width [inches] | 2″ |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 2.0 |
| Abrasive Backing Material | Woven Cloth |
| Abrasive Sub Shape 2 | 1/4″ Shank |
| Abrasive Tier | Good |
| Case Qty | 1.0 |
| EAN (UPC) Code | 0616026783157 |
| GL_Minimum Order Quantity | 1.0 |
| Quantity Each Pack | 10 |
| Abrasive Grit / Grade | Very Fine |
| Type | Non-Woven Nylon |

3M 26106, PPS Series 2.0 Adapter, Type S22, 8 mm Male, 0.75 mm Thread, 7100135958
Dynabrade 78764 2" Dia. x 2" W x 1/4" Shank, Medium, NWN DynaBrite Wheel, 10/pack
Dynabrade 01185 Vane Set (4pk)
3M 27712, Cubitron II Roloc Durable Edge Disc 984F, 60+, YF-weight, TSM, Maroon, 1-1/2 in, Die RS150SM, 7000119218, 200 per case
3M 95725, Venture Tape Metal Building Facing Tape 1552CW, White, 72 mm x 45.7 m, 7010313505
DeVilbiss AV-1239-704, Air Cap #704
3M 33446, Cubitron II File Belt, 80+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033186, 10 belts per carton, 5 cartons per case
3M 77157 Scotch-Brite Durable Flex Belt, 77157, 1/2 in x 18 in, A MED, Trial Pack, 7010365702
3M 26104, PPS Series 2.0 Adapter, Type S20, 1/8 Male, 27 Thread NPSM, 7100135929
Dynabrade 91425 1/4" W x 12" L 60 Grit A/O DynaCut Belt, 50/pack
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
3M 26006, PPS Series 2.0 Adapter, Type S5, 12 mm Male, 1.5 mm Thread, 7100135831
Insize 7232, SCRIBER, 6928640320088
3M 19892, Neoprene High Performance Contact Adhesive 1357, Gray-Green, 1 Quart Can, 7000046324, 12/case
Dynabrade 77760 4-1/2" Dia. x 7/8" Center Hole, 120 Grit, Z/A, Type 27, DynaCut Flap Disc W/Fiberglass, 10/pack
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
3M 07054, Scotch Printable Flatback Paper Tape 256, White, 1 in x 60 yd, 6.7 mil,36 per case (12 rolls/pack 3 packs/case), 7010378934
3M 07053, General Purpose Sanding Sponge CP040-12-CC, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Fine, 7100101245
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
3M Super Abrasives Roloc Disc, 2" Type-R, Medium AO High Strength, Box of 50
Standard Abrasives 701974, A/O Full Taper Cartridge Roll, 1/2 in x 2 in x 1/8 in 80, 7100092841
Dynabrade 14000 Dynafile Abrasive Belt Tool
3M 09413, Scotch-Brite Contour Surface Paint and Varnish Remover 9413NA, 7000052005
3M 50010, VentureClad Insulation Jacketing Tape 1577CW-WME, White, 99 mm x 13.7 m, 7010379907
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor 
