-
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $87.61 -
×
3M 65022, Scotch-Brite Deburr and Finish Pro Unitized Wheel, DP-UW, 6C Medium+, 3 in x 3/4 in x 1/4 in, 7100053421
20 × $24.62 -
×
3M 00581 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2-1/2 in x 60 in, 7010329198
10 × $37.87 -
×
3M 00584 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 3 in x 118 in, 7010365595
5 × $68.74 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
Dynabrade 78122 2" Dia. Medium NWN DynaBrite Locking-Type Disc, 25/pack
25 × $1.66 -
×
3M 64926, Scotch-Brite Hand Pad 7447 PRO, PO-HP, A/O Very Fine, 6 in x 9 in, 7100023339, 20/Carton
3 × $28.53 -
×
3M 36878, Self-Stick Liquid Protection Fabric, Blue, 14 in x 300 ft, 7100169505
2 × $311.73 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 36881, Self-Stick Liquid Protection Fabric, Blue, 48 in x 300 ft, 7100169351
1 × $1,135.55 -
×
Dynabrade 91162 3/8" W x 13" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.60 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
Dynabrade 78535 3/8" x 3/4"-B52 Dynacut Cotton Fibre Fine DeBurring Mounted Point, 80MTX, 10/pack
10 × $10.80 -
×
Dynabrade 78725 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.46 -
×
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
60 × $4.62 -
×
3M 03999 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2 in x 132 in, 7010309300
5 × $51.26
3M 04145, Scotch-Brite Finishing Flap Brush, 8 in x 1 in x 3 in 5A FIN, 7000120562
$72.58
Factory Stock, 7-10 Day Leadtime
Scotch-Brite Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. Our long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.
Scotch-Brite Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.
This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our Scotch-Brite abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
