-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Insize 4102-136, STEEL GAGE BLOCK SET, 36pcs, grade AS-1, 6928640329876
1 × $416.78 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.69 -
×
3M 33439, Cubitron II File Belt, 33439, 60+, 10 mm x 330 mm (3/8 in x 13 in), 7100033194, 10 belts per carton, 5 cartons per case
50 × $24.66 -
×
Insize 7262-300, OUTSIDE SPRING CALIPER, 12", 6928640319693
1 × $29.03
-
×
Insize 7262-250, OUTSIDE SPRING CALIPER, 10", 6928640319686
1 × $25.73
-
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
1 × $25.96 -
×
Insize 0213-A500, INFRARED THERMOMETER, -58?F~716?F/-50?C~380?C, 6940561934700
1 × $79.29
-
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $36.72 -
×
3M 84177, Microfinishing PSA Film Disc Roll 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7000118206, 125 discs per roll
4 × $117.10
-
×
3M 49941, Roloc Disc 361F, 80 YF-weight, TSM, 3 in, Die RS300VM, 7000148151
200 × $1.38 -
×
3M 10118, Synthetic Steel Wool Pads, 10118NA, #0 Fine, 7000126148
18 × $2.69 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.69 -
×
Insize 7261-150, INSIDE SPRING CALIPER, 6", 6928640319624
1 × $15.25
-
×
Dynabrade 95746 3/8" NPT Speed Regulator
1 × $104.56 -
×
Dynabrade 79448 6" x 9" DynaBrite General Purpose Maroon Hand Pad, 20/box
20 × $28.56
3M 87429, Final Finishing Pads 10199NA4PK, 3 3/4 in x 6 in x 5/8 in, Replaces 0000 Steel Wool, 7100096075, 4 pads per pack
$3.12
Factory Stock, 7-10 Day Leadtime, Priced Per Pack
3M Between Coats Finishing Pads are used to prepare surfaces before applying the first coat of finish or sealer and again between coats to obtain a super-smooth finish.
Final Finishing Pads. Use final finishing pads with waxes or oils to buff shellac, lacquer and varnished surfaces. They can also be used to clean delicate surfaces and precision tools. These pads buff and polish during the final finishing stage.
Related products
Non-Woven Hand Pads
3M 04028, Scotch-Brite Hand Pad 7448, HP-HP, SiC Ultra Fine, Gray, 6 in x 9 in, 7100089226, 60/case
$88.64
Non-Woven Hand Pads
3M 64935, Scotch-Brite Hand Pad 7448 PRO, PO-HP, SiC Ultra Fine, 6 in x 9 in, 7100023340, 20/Carton
$29.58
