The performance of Scotch-Brite General Purpose Hand Pad 7447 is comparable to steel wool grade 1. However, unlike steel wool, our Scotch-Brite pads wont shred during use, rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or solvents, and rinsed clean for reuse. This multipurpose 6 x 9″ pad can be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander to cover large areas.
This maroon hand pad uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our Scotch-Brite industrial abrasive products are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

3M 13170, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Coarse, 6 in x 1 in x 1 in, 7100006330
Insize 4120-14, METRIC THREAD RING GAGE, GO, M14x2, 6928640341489
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
ACS Diamond Cloth Belt, CX1250 3/8" X 24" 75U
Dynabrade 40320 Dynafile II Abrasive Belt Tool
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
Standard Abrasives 880315, Buff and Blend GP Wheel, 2 in x 2 Ply x 1/4 in A VFN, 7100095565
Standard Abrasives 725008, Buff and Blend Cross Buff HP, A/O Very Fine, 1 in x 3/8 in x 2 Ply x 8-32, 7000046829
Dynabrade 78423 4-1/2" Dia. x 3/8" Very Fine DynaBrite Surface Conditioning Disc, 25/pack
3M 51033, Roloc Disc 361F, 36 YF-weight, TSM, 3 in, Die RS300VM, 7000148150
3M 26173, PPS Series 2.0 12-Pack Refill Kit, Standard (22 fl oz, 650mL), 200 Micron Filter, 7100166278
3M 15831, Scotch-Brite EXL Unitized Wheel, XL-UW, 2S Fine, 6 in x 1/2 in x 5/8 in, 7100106744
3M 77199, Scotch Brite Roloc Deburr & Finish PRO Unitized Wheel, DP-UR, 8C Coarse+, TR, 3 in x 1/4 in x NH, 7100109110
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
3M 03700, Scotch-Brite Cut and Polish Unitized Wheel, CP-UW, 7A Medium, 1 in x 1 in x 3/16 in, 7000045846
3M 13177, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Medium, 6 in x 2 in x 1 in, 7000045922
3M 13180, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Medium, 6 in x 3 in x 1 in, 7000148248
Norton 66261014936 3" DIA X 1/8" Thick, Bear-Tex NEX Rapid Blend Quick-Change Type III Non-Woven Unified Wheel, 40 Each
3M 13172, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Fine, 6 in x 1 in x 1 in, 7000136471
3M 09555, Scotch-Brite EXL Deburring Wheel, XL-WL, 8S Fine, 12 in x 2 in x 5 in, 7000148257
3M 15512, Scotch-Brite EXL Unitized Wheel, XL-UW, 6A Medium, 2 in x 1/8 in x 3/16 in, 7000000705
Dynabrade 78128 3" Dia. Coarse NWN VT DynaBrite Locking-Type Disc, 25/pack
3M 15515, Scotch-Brite EXL Unitized Wheel, XL-UW, 6A Medium, 1-1/2 in x 1/8 in x 3/16 in, 7100063701
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack 
