The performance of Scotch-Brite General Purpose Hand Pad 7447 is comparable to steel wool grade 1. However, unlike steel wool, our Scotch-Brite pads wont shred during use, rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or solvents, and rinsed clean for reuse. This multipurpose 6 x 9″ pad can be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander to cover large areas.
This maroon hand pad uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our Scotch-Brite industrial abrasive products are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

3M 83330, Cubitron II Fibre Disc 982CX Pro, 36+, 4 in x 5/8 in, Die 400FF, 7100242928
Standard Abrasives 713159, Aluminum Oxide Handy Roll, P120 J-weight, 1-1/2 in x 50 yd, 7010290409
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
Dynabrade 95848 Dynabrade Gear Oil
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
Dynabrade 14360 Pneumatic Pipe Belt Finisher
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
Dynabrade 15420 Dynafile III Abrasive Belt Tool
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
Dynabrade 98265 3/8" Female Coupler with 3/8" Male Plug Assembly
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
Insize ISR-CSE018, SHOT AND GRIT BLASTING SURFACE ROUGHNESS SPECIMEN, 6928640376559
Dynabrade 77775 5" Dia. x 7/8" Center Hole, 120 Grit, Type 27, Ceramic DynaCut Flap Disc, 10/pack
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
Dynabrade 92207 1/8" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack 
