-
×
Dynabrade 78743 1/4" x 3/4"-W164 DynaFire A/O Mounted Point, Vitrified, 5/pack
5 × $2.40 -
×
3M 56038, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 3 in x 7/8 in, Die 300M, 7000000297, 100/Case
100 × $0.51 -
×
3M 04281 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Very Fine, 4 in x 132 in, 7010292398
5 × $102.53 -
×
3M 25678, Scotch-Brite EXL Unitized Wheel, XL-UW, 2S Fine, 6 in x 1/4 in x 3/4 in, 7000120982
8 × $27.15 -
×
3M 05526, Wetordry Sponge Pad 20, 5-1/2 x 2-3/4 in x 3/8 in, 7000045663
50 × $6.21 -
×
Standard Abrasives 840032, Quick Change Surface Conditioning FE Disc, A/O Medium, TSM, Maroon, 3/4 in, QS75KM, 7000046846, 50/case
50 × $0.96 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.32 -
×
3M 20227, Scotch-Seal Metal Sealant 2084, Silver, 5 oz Tube, 7000046343, 36/Case
36 × $23.01 -
×
3M 08916 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2 in x 60 in, 7010309628
10 × $30.29 -
×
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
24 × $16.94 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M 20360, Scotch-Weld Epoxy Adhesive 2216, Gray, Part B, 5 Gallon Drum (Pail), 7000046360
5 × $509.65 -
×
3M 02690, Plastic Bonding Adhesive 2665B, Black, 30 cc syringe, 7100111531, 24/case
1 × $1,986.27 -
×
Standard Abrasives 32953, PSA A/O Disc, 711880, 2 in x NH, 60, 7010310798
100 × $0.00 -
×
3M 47201, Polyurethane Sealant 540, Black, 600 mL Sausage Pack, 7100198009, 12/Case
12 × $14.30 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
Dynabrade 90872 2" Dia. Coarse NWN DynaBrite Locking-Type Disc, 25/pack
25 × $1.89
3M 27748, Scotch-Brite High Strength Disc, 6 in x 1/4 in, A VFN, 7000120988
$3.31
Factory Stock, 7-10 Day Leadtime
Scotch-Brite High Strength Disc is a general purpose disc made of a durable, tough web and is designed to effectively clean, deburr, denib/defuzz, and achieve satin finishes. The durable, non-woven, open-web construction resists loading and runs cool to keep the abrasives cutting at a consistent rate throughout the life of the disc.
Conformability allows the Scotch-Brite High Strength Disc to work well on irregular surfaces and into tight areas without damaging the base material. This disc may be used individually or stacked on a straight shaft tool or bench motor to condition larger areas, bar grates, louvers, vents, and tracks.
Scotch-Brite is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.
Related products
