-
×
3M 49938, Roloc Disc 361F, 80 YF-weight, TSM, 2 in, Die RS200PM, 7000119019
200 × $0.97 -
×
3M 20227, Scotch-Seal Metal Sealant 2084, Silver, 5 oz Tube, 7000046343, 36/Case
36 × $23.01 -
×
3M 28120, Hookit Clean Sanding Disc 900DZ, 5 in 60 J-weight, Die 500LG, 7010326613
250 × $1.51 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
Dynabrade 53244 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 7,200 RPM, 5/8"-11 Spindle
1 × $1,515.78 -
×
3M 51033, Roloc Disc 361F, 36 YF-weight, TSM, 3 in, Die RS300VM, 7000148150
200 × $1.50 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 57894, 642WY 1/4" X 24", 50000 Mesh Diamond Cloth Belt, 7100230570
15 × $0.00 -
×
3M 20922, PSA Cloth Disc 348D, 60 X-weight, 1-1/2 in x NH, Die 150S, 7010326528.
500 × $0.48 -
×
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
50 × $1.22 -
×
3M 76624, Roloc Disc 777F, 60 YF-weight, TR, 1 in, Die R100N, 7000045620
500 × $0.62 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $94.50
3M 21039, Scotch-Brite Clean and Strip XT Pro Extra Cut Disc, CX-DN, A/O Extra Coarse, TN, Green, 7 in x 5/8″-11, 7100175522
$18.40
Factory Stock, 7-10 Day Leadtime
Scotch-Brite Clean and Strip XT Pro Extra Cut Disc features aluminum oxide abrasive mineral incorporated into an open nylon web. It is designed to remove heavy rust, thick paint and corrosion while also scratching the base material underneath, which can save you time. The highly conformable, high-strength fibers resist chunking and loading, and they perform well on edges.
Take Advantage of High Conformability
With its reengineered fiber web, the Scotch-Brite Clean and Strip XT Pro Extra Cut Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.
In addition to its high conformability, the Scotch-Brite Clean and Strip XT Pro Extra Cut Disc offers low vibration, decreased chunking, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.
Save Time with Aluminum Oxide
We designed our Scotch-Brite Clean and Strip XT Pro Extra Cut Disc with aluminum oxide abrasive mineral because of its ability to remove heavy coatings and simultaneously scratch and clean to the bare metal underneath without leaving divots. This means that operators can remove a coating from a workpiece and get it ready for welding or adhesive application with the same disc ? saving the time of switching abrasives.
Spongy Web, Sharp Mineral
To engineer our Scotch-Brite Clean and Strip XT Pro Extra Cut Disc, aluminum oxide mineral is combined with non-woven nylon fibers using resin. Aluminum oxide is a very hard mineral that delivers a high cut rate, commonly used in high-pressure applications like cutting and weld removal. The resin bond strengthens the fiber web and allows it to gradually break down to reveal new fibers and sharp mineral ? delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.
Applications
- Removing heavy rust
- Removing rust pits
- Removing thick paint
- Removing corrosion
- Removing weld discoloration
- Weld cleanup
Related products
