-
×
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.02 -
×
Dynabrade 93559 3" Dia. x 1/4"-20 Female Center Thread, 120 Grit, A/O, 3-Ply, J-DynaCut Eyelet Star, 50/pack
50 × $14.74 -
×
Dynabrade 67202 Utility Arm, 2" Dia. x 5/8", 70 Duro Serrated Urethane
1 × $399.96 -
×
Dynabrade 96778 Lock Tie, Black
1 × $17.86 -
×
Dynabrade 90367 3/4" W x 34" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $2.38 -
×
Dynabrade 52405 2" Dia. 7 Degree Offset Disc Sander, Rear Exhaust, .5 HP, 20,000 RPM, 1/4"-20 Thread
1 × $548.41 -
×
Dynabrade 53092 1/2" Pistol Grip Drill, .7 HP, Rear Exhaust, 500 RPM
1 × $1,430.06 -
×
Dynabrade 50210 3" Dia. Right Angle Disc Sander, Self-Generated Vacuum, 15,000 RPM
1 × $778.44 -
×
Dynabrade 58502 3" W x 4-1/4" L Dynabug II Orbital Sander, Central Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $250.15 -
×
Dynabrade 52402 2" (51 mm) Dia. 7 Degree Offset Disc Sander, Front Exhaust, .5 HP, 20,000 RPM, 1/4"-20 Thread
1 × $521.29 -
×
Dynabrade 52657 7" Dia. Right Angle Disc Sander, Rotational Exhaust, 1.3 HP, 6,000 RPM, 5/8"-11 Thread
1 × $896.53 -
×
Dynabrade 78476 2-1/2" Dia. x 3/4", 8-32 Female Center Thread, A/O, 180 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
100 × $2.65 -
×
Dynabrade 78477 3" Dia. x 1", 1/4-20 Female Center Thread, A/O, 60 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
100 × $3.24
-
×
Norton 66261014936 3" DIA X 1/8" Thick, Bear-Tex NEX Rapid Blend Quick-Change Type III Non-Woven Unified Wheel, 40 Each
40 × $11.26
3M 05309, Scotch-Brite High Strength Disc, HS-DC, A/O Very Fine, 3 in x 1/4 in, 7010365607
$1.57
Factory Stock, 7-10 Day Leadtime
Scotch-Brite High Strength Disc is a general purpose disc made of a durable, tough web and is designed to effectively clean, deburr, denib/defuzz, and achieve satin finishes. The durable, non-woven, open-web construction resists loading and runs cool to keep the abrasives cutting at a consistent rate throughout the life of the disc.
Conformability allows the Scotch-Brite High Strength Disc to work well on irregular surfaces and into tight areas without damaging the base material. This disc may be used individually or stacked on a straight shaft tool or bench motor to condition larger areas, bar grates, louvers, vents, and tracks.
Scotch-Brite is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.
Related products
