-
×
3M 86802, Cubitron II Stikit Film Disc 775L, 80+, 5 in x NH, Linered w/Tab, Die 500X, 7100048736, 250 per case
250 × $1.11 -
×
3M 18081, Scotch-Brite Roloc SE Surface Conditioning Disc, SE-DR, A/O Coarse, 18081, 2714483, TR, 2 in, 7000046111, 200 per case
200 × $1.63 -
×
3M 54256, Cubitron II Roloc Durable Edge Disc 947A, 80+, X-weight, TR, Maroon, 2 in, Die R200P, 7100076925, 200 per case
200 × $1.33 -
×
3M 96964, Cartridge Roll 341D, P240 X-weight, 1/4 in x 1 in x 1/8 in, 7100080019
100 × $0.50 -
×
3M 97015, Cartridge RoII 341D, 3/8 in x 1-1/2 in x 1/8 in, P120 X-weight, 7010363828
200 × $0.65 -
×
3M 14099, Scotch-Brite Surface Conditioning Disc, SC-DH, A/O Very Fine, 4-1/2 in x NH, 7000046017
50 × $3.25 -
×
3M 55667, Stikit Film Disc 375L, P600, 5 in x NH, Die 500X, 7100063997, 250 per case
250 × $0.54 -
×
3M 89676, Roloc Fibre Disc 782C, 80+, TR, 3 in, Die R300V, 7100100986, 200 per case
200 × $2.24 -
×
Standard Abrasives 840458, Quick Change Buff and Blend HS Disc, Medium, TR, Blue, 3 in, Die Q300V, 7100074872, 25/case
25 × $3.71 -
×
3M 65083, Scotch Brite Roloc Deburr & Finish PRO Unitized Wheel, DP-UR, 6C Medium+, TR, 3 in x 1/4 in x NH, 7100081365
40 × $13.01 -
×
3M 47111, Cubitron II Hookit Clean Sanding Film Disc 775L, 320+, 3 in, Die 300DS, 7100145433, 250 per case
250 × $0.48 -
×
3M 89654, Fibre Disc 787C, 120+, 4-1/2 in x 7/8 in, Die 450E, 7100099280
100 × $3.21 -
×
3M 46902, No Residue Duct Tape 2420, 1.88 in x 20 yd (48 mm x 18.2 m), 7100270251
1 × $7.94 -
×
3M 55598, Hookit Clean Sanding Disc 236U, 5 in P80 C-weight, 7010029926
250 × $1.07 -
×
3M 89633, Fibre Disc 787C, TN Quick Change, 4-1/2 in 36+, 7100099291
200 × $4.32 -
×
3M 27672, Scotch-Brite Surface Conditioning Disc, 4-1/2 in x NH A MED, 7000136523
10 × $3.26 -
×
3M 20871, PSA Cloth Disc 348D, 60 X-weight, 8 in x NH, Die 800L, 7000118903
250 × $3.31 -
×
3M 27718, Cubitron II Roloc Durable Edge Disc 984F, 80+, YF-weight, TR, Maroon, 3 in, Die R300V, 7000045176, 200 per case
200 × $1.82 -
×
3M 54264, Cubitron II Roloc Durable Edge Disc 947A, 120+, X-weight, TR, Maroon, 2 in, Die R200P, AB54264, 7100076933, 200 per case
200 × $1.38 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
Standard Abrasives 541052, Quick Change TS Medium Disc Pad w/TA4, 1 in, 7000121637
$13.95
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Quick Change Disc Pads, also called Holder Pads, allow you to rapidly change Standard Abrasives quick change discs (sold separately) during multi-step projects. ?A wide range of sizes and densities are available, ensuring that you can find the pad(s) that best suits your specific grinding and finishing application.
Three Attachment Types: TS, TR, TP
Standard Abrasives™ Quick Change Disc Pads come with one of three quick change attachment styles. Attachment styles include TS, TR and TP. TS is a standard metal-to-metal attachment style, TR is a 3M™ Roloc™ style nylon threaded male hub, and TP is a snap-on/snap-off nylon fastening hub. Each of the attachment styles allows easy swap out of discs with a speedy quarter turn.
Choosing a Mandrel
Our Standard Abrasives™ Quick Change Disc Pads are available with or without mandrels. Some TS and TR holder pads come with an attached 1/4-inch diameter TA4 mandrel. Others come with an attached 6 mm diameter TA6 mandrel. TP disc holders come with the TA4 mandrel attachment only. Disc pads are also available without mandrels, so users can select a mandrel of their choice for their application. Holders without an attached mandrel feature a 1/4-20 female thread interface for mandrel attachment. Once the mandrel is attached, users typically fasten the disc pad/mandrel assembly to a rotary tool or die grinder.
Which Density is Best?
Different densities signal varying levels of flexibility of the disc pad. Soft density disc pads are most flexible, and are typically reserved for fine grade abrasive products used in finishing and contouring applications. Medium density disc pads are typically used for general purpose type work. Hard density disc pads are the most rigid, and are typically reserved for coarse grade abrasive products used in weld grinding and stock removal applications.
Altogether, Standard Abrasives™ Disc Pads allow for quick and easy disc attachment and removal, enhancing productivity and adding efficiency to your industrial applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
