Power in the Palm of Your Hand
Part of our Paint Defect Removal Hand Sanding System, our 3M™ Paint Defect Removal Abrasive Rectangle Sheet is shaped for cutting out small paint nibs in painted surfaces by hand without sanding the surrounding areas. This 37 mm x 28 mm (approx. 1” x 1-1/2”) rectangular abrasive sheet acts as a miniature straight line sander, right in the palm of your hand. It features durable film backing that can be used for dry sanding or wet sanding. Coated aluminum oxide abrasive is optimized to resist loading and remain sharp when sanding small areas. Choose from a range of fine grades for removing small defects, dirt nibs and sand scratches.
The Abrasive Rectangle Sheet fits onto our specially-designed handheld sanding blocks and backing pads, also part of the system, to form a small microsanding tool for powerful sanding in minimal repair areas. Our Stikit™ adhesive attachment keeps it secure and firmly in place during hand sanding. Technicians do not need to sand most or all of a painted panel to remove small defects, saving time and materials. And minimal compounding and polishing means much less time is required for cleanup.
Our Stikit™ Attachment System
Our Abrasive Rectangle Sheets come ready to use with a pressure sensitive adhesive coating on the backs – simply press them onto the Paint Defect Removal Hand Sanding Block, Foam Pad or Rubber Pad and you’re ready to go. The rectangles stay put even during aggressive sanding. They remove just as cleanly, leaving an uncontaminated surface for the next rectangle. This makes it fast and easy to change Abrasive Rectangle Sheets among tools, and to reuse them for maximum abrasive life and cost-efficiency.
The Science of Better Paint Finishing from 3M
The Paint Defect Removal Abrasive Rectangle Sheet is part of our 3M™ Paint Defect Removal Hand Sanding System – small, advanced abrasives and hand tools that save time and money removing paint nibs and other small defects. It’s another way that 3M applies science to the lives of auto repair technicians, consistently improving your efficiency, throughput and value as you prepare painted surfaces.

Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
Dynabrade 14336 Platen Pad Assy
Dynabrade 56470 ND9280 Mounting Plate Assy
Dynabrade 80020 Dynamount Bench Mount (for Dynafile 14000)
Dynabrade 02673 Rear Bearing Plate
Dynabrade 61420 Raptor Vac Electric Portable Vacuum System
Dynabrade 64354 26" x 36" (660 mm W x 914 mm L) Metal Capture Downdraft Station, 460 V (AC)
Dynabrade 56054 Insert (30/Pkg.)
Dynabrade 90704 5" Dia. x 1" W, 36 Grit, Z/A DynaCut Band, 10/pack
Dynabrade 78304 1-1/2" Dia. x 1" W x 1/4" Shank, 60 Grit, A/O DynaCut Flap Wheel, 10/pack
Dynabrade 52222 .5 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 20,000 RPM, 1/4" Collet
Dynabrade 78478 3" Dia. x 1", 1/4-20 Female Center Thread, A/O, 80 Grit, 8-Ply J-DynaCut Cross Pad, 100/pack
Dynabrade 92754 3" W x 150' L 15 Micron A/O Microfinishing Film DynaCut Roll
Dynabrade 82576 1/4" W x 24" L 80 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 58503 3-1/4" W x 5" L Dynabug II Orbital Sander, Non-Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
Dynabrade 78195 3" Dia. x 36 Grit A/O DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
Dynabrade 52863 .4 hp Straight-Line Pencil Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
Dynabrade 54374 .7 hp Extended Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
Dynabrade 15010 Mini-Dynafile II Abrasive Belt Tool For 18" Belt
Dynabrade 31991 - 3/4" to 1" Vacuum Whip Hose 4" Long w/Swivel Adaptor
Dynabrade 78673 3/4" Dia. x 1-1/2" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 60 Grit, 100/pack
Dynabrade 79471 4" Dia. x 4" W, 3/4" Center Hole, 80/Medium, DynaBrite Interleaf Wheel
Dynabrade 15002 Vacuum Mini-Dynafile II Abrasive Belt Tool
Dynabrade 90375 2" W x 34" L 220 Grit A/O DynaCut Belt, 10/pack
Dynabrade 51347 3" (51 mm) Dia. Locking-Type Disc Pad, Medium Density, 3/8"-24 Thread
Dynabrade 53812 .7 hp Straight-Line Die Grinder, Steel Housing, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 52678 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
Dynabrade 95698 [2-1/4" Thread - 2" Non-Thread], Non-Conductive Vacuum Hose Swivel Cuff
Dynabrade 52719 Cone or Plug 6" (152 mm) Extension Wheel Grinder, 12,000 RPM, 3/8"-24 Male Thread Spindle
Dynabrade 58035 1-1/4" Dia. Right Angle Mini-Orbital Sander, 15K RPM, .4 HP, Front Exhaust
Dynabrade 57930 Dynafine Finger Sander, .12 HP, 15,000 RPM, 1/32" Orbit
Dynabrade 52900 Take-About Sander Abrasive Belt Tool, Central Vacuum
Dynabrade 01894 Drop-In Motor
Dynabrade 52173 Shim (4/Pkg.)
Dynabrade 78770 3" Dia. x 2" W x 1/4" Shank, Very Fine, NWN DynaBrite Wheel, 10/pack
3M 20912, PSA Cloth Disc 348D, 40 X-weight, 2 in x NH, Die 200P, 7000118920
3M 13180, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Medium, 6 in x 3 in x 1 in, 7000148248 
