-
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $746.76 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
3M 70894, 641WY 1/2" X 24", 100 Mesh Diamond Cloth Belt, 7010533228
1 × $19.01 -
×
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
200 × $3.47 -
×
3M 50013, Venture Tape Cloth Duct Tape 1500, Silver, 72 mm x 55 m (2.83 in x 60.1 yd), 7010337384
16 × $22.28 -
×
Standard Abrasives 713066, PSA A/O Disc, 8 in x NH, 60, 7010370082
10 × $2.48 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 41100, Cubitron II Cloth Belt 984F, 60+ YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010511304, 200 per case
400 × $2.98 -
×
Standard Abrasives 708751, PSA A/O Disc, 12 in x NH, 60, 7010370081
10 × $5.83 -
×
3M 67925, Cloth Belt 777F, P120 YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010363457, 200 per case
200 × $2.18 -
×
3M 24338, Scotch-Brite EXL Deburring Wheel, XL-WL, 8A Medium, 16 in x 1 in x 10 in, 7100074355
1 × $222.57 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,583.72 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 88871, PSA Cloth Disc 777F, 60 YF-weight, 12 in x NH, Die 1200B, 7000120238
10 × $15.13 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47
3M 33285, Perfect-it Foam Polishing Pad, 33285, 6 in, 6 per case, 7100145327
$26.61
Factory Stock, 7-10 Day Leadtime
3M Perfect-it Foam Polishing Pad is a soft foam buffing pad used to buff out fine scratches created from compounding steps. The waffle face gives you greater surface contact area than flat surface pads over contoured surfaces, minimizes heat buildup during buffing and helps eliminates swirl marks. It also helps the pad hold the polish and reduce slinging.
Better Paint Demands Better Products
We designed this grey buffing pad to be used in conjunction with our 3M™ Perfect-it™ EX family of polishes specially developed to quickly remove compounding swirls. The pad removes the compounding swirl marks left by either foam or wool pads and can also be used in the 3M™ Perfect-it™ Paint Finishing System for paint and clear coats repair when the finest finish is required. Finish results are dependent on the combination of coating type, polish, and tools used.
The Evolution of Paint and Clear Coat
We developed foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They operate between 1200 and 2000 rpms to remove fine scratches, compound swirl marks, and surface marring. Foam buffing pads are used in conjunction with machine polishes and are suitable to use with rotary and random orbital tools.
The 3M™ Perfect-It™ Suite of Products
Our 3M™ Perfect-It™ system was created to produce show-room grade finishes with deep color and rich gloss. Our system uses a progressive series of abrasives, buffing pads, and proprietary polishes across four stages of repair. The stages consist of sanding, scratch refinement, compounding, machine polishing, and swirl elimination. The level of work and stages needed for paint repair depend on the severity of the paint imperfection and Perfect-It™ provides an effective solution for any level of clear coat and paint repair.
