-
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
3M 45021, Diamond Grade DG3 Reflective Digital Sheeting 4081UDS, Fluorescent Yellow, 24 in x 50 yd, 1 Roll/Case, 7100282401
1 × $1,631.05 -
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63
-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Norton 66254414832 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 5am U2305, 40 Each
40 × $11.50 -
×
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
60 × $4.78 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
3M 26018, PPS Series 2.0 Adapter, Type S11, 3/8 Male, 18 Thread NPS, 7100135942
1 × $25.96 -
×
Insize 7341-7S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .341-.406", 6928640370625
1 × $46.70
-
×
Insize 7261-150, INSIDE SPRING CALIPER, 6", 6928640319624
1 × $15.25
-
×
Insize 7113-300A, RIGID RULE, 12"/300mm, 6928640319860
1 × $24.61
-
×
Standard Abrasives 32953, PSA A/O Disc, 711880, 2 in x NH, 60, 7010310798
100 × $0.00 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00
3M 88769, FLAP DISC HOLDER T27, 4 IN 5/8-11 INTERNAL, 7010364084
$103.57
Factory Stock, 7-10 Day Leadtime
The 3M Flap Disc Holder helps secure 3M flap discs and cup wheels to power tools. Specifically, it accommodates Type 27 flap discs and wheels that have a depressed center and measure 6 or 7 inches in diameter. Abrasives without a built-in hub reach their maximum potential with the help of the 3M Flap Disc Holder.
Securely Mount Type 27 Flap Discs and Wheels to Power Tools
3M Flap Disc Holder includes all the necessary components to make abrasive-to-tool attachment secure: spacers, flanges, retainer nut, and an Allen wrench. The spacers are optional and intended to accommodate different spindle lengths among common commercially available right angle grinders, while still placing the abrasive product of choice safely within the grinder guard.
Once all the components and the accompanying abrasive have been properly mounted, use an Allen wrench to twist the retainer nut and tighten the entire system, locking it into place. 3M Flap Disc Holders are commonly used on right angle grinders.
Safety First: Tips for Optimal Performance
As with all abrasives and power tools, it?s important to take safety precautions. Two simple safety measures include using a guard on the right angle grinder and complying with the maximum operating speed.
First, a guard prevents debris from flying and minimizes the risk of injury. As mentioned above, it?s important that the disc be positioned within the guard, to ensure maximum safety and to allow the guard to function as designed. Finally, the maximum operating speed of the tool should be equal to or less than the speed indicated on the abrasive. By abiding by the proper speed, operators reduce the risk of injury and may also prolong abrasive service life.
Make the Most of Your Abrasive
We offer a range of Type 27 flap discs and wheels (sold separately) to meet your grinding needs. These abrasives are great for grinding and blending in one easy step. Fresh mineral is exposed for the life of the disc, helping to provide consistent cut rates. These abrasives tackle projects like weld grinding, blending, deburring, rust removal and surface prep on a variety of metals. For those abrasives that come without an integral 5/8-11? hub, the 3M Flap Disc Holder helps you securely attach the disc or wheel to the power tool and make the most of your abrasive.
