3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

3M 20932, PSA Cloth Disc 348D, 80 X-weight, 1 in x NH, Die 100N, 7000118914
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 29882, Sanding Screen, 220 Grit, 18 in x NH, 7100160813
3M 29860, Sanding Screen, 120 grit, 12 in x 18 in, 7100160860
3M 20910, PSA Cloth Disc 348D, 60 X-weight, 2 in x NH, Die 200P, 7000118872
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
3M 49936, Roloc Disc 361F, 36 YF-weight, TSM, 2 in, Die RS200PM, 7000119014
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 08029, Marine Grade Silicone Sealant, Clear, 304 mL Cartridge, 7000120477, 12/Case
3M 62714, Scotch-Weld Stainless Steel High Temperature Pipe Sealant PS67, White, 50 mL Tube, 7100039216, 10/case
3M 47838, EMI Copper Foil Shielding Tape 1181, 23 in x 18 yd (58.42 cm x 16.5 m), 7000058121
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 49456, EMI Aluminum Foil Shielding Tape 1170, 2 in x 18 yd, 1170-2"X18YD, 7000132702
3M 19769, Utility Cloth Sheet 314D, 9 in x 11 in P150 J-weight, 7000000357
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
Dynabrade 25234 Vane Set (4pk)
Insize 6318, CALIPER/MICROMETER GRINDING MACHINE (caliper grinding blocks are included), 6940561953862
3M 16582, Accuspray Atomizing Head, Blue, 1.2 mm, 7010363219
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 05048, Cloth Belt 384F, 80+ XF-weight, 1 in x 12 in, Fabri-lok, Full-flex, 7100141432, 200 per case
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
Dynabrade 15420 Dynafile III Abrasive Belt Tool
Dynabrade 92186 1" W x 30" L 60 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
ACS Diamond Cloth Belt, CX1250 1/4" X 24" 75U
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 62812, Adhesive Sealant 740 UV, White, 290 mL Cartridge, 7100116448, 12 per case
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 30202, Disposable Plastic Wheel Maskers, 12 in - 15 in, 125 per box, 7000125074
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M™ 37018, Supplied Air Respirator Vortex Cooling Assembly V-100/37018(AAD), 70070799013, 1 EA/Case
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093 
