3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
Standard Abrasives 863240, S/C Unitized Wheel, 632, 3 in x 1/2 in x 1/4 in, 7100075531
3M 20922, PSA Cloth Disc 348D, 60 X-weight, 1-1/2 in x NH, Die 150S, 7010326528.
Dynabrade 15006 Mini-Dynafile II Abrasive Belt Tool Versatility Kit
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
Dynabrade 93381 Carbide Burr 12-Piece Burr Kit, 3mm Shank
Insize 0210-G260, INFRARED THERMOMETER (BASIC TYPE), -22 ?F~500?F/-30?C~260?C, 6974029773310
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
3M 33057, Scotch-Brite Radial Bristle Brush Replacement Disc, BB-ZB, 220, Type C, 6 in, Refill, w/o Adaptor, 7100138302
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
Dynabrade 78600 3/8" Dia. x 2" W x 1/8" Center Hole, 120 Grit, 100/pack
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 19770, Utility Cloth Sheet 314D, 9 in x 11 in P120 J-weight, 7000000358
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
3M 26106, PPS Series 2.0 Adapter, Type S22, 8 mm Male, 0.75 mm Thread, 7100135958
3M 34411, Flexible Diamond Hand File 6210J, 1-3/4 in x 1/2 in M74 Micron, 7000082159, 10 per box
3M 85309, Aluminum Foil Tape 425, Silver, 3/4 in x 60 yd, 4.6 mil, 7100053743
Dynabrade 92025 2" Dia. x 36 Grit Ceramic DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
Dynabrade 95541 Grease Gun
3M 26104, PPS Series 2.0 Adapter, Type S20, 1/8 Male, 27 Thread NPSM, 7100135929
Standard Abrasives 850034, Unitized Wheel Steel Screw Mandrel, 7/8 in x 1/4 in Shank, 7000121879
3M 19764, Utility Cloth Sheet 314D, 9 in x 11 in P320 J-weight, 7000000352
3Mâ„¢ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 45711, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113118
3M 82239, Scotch-Weld Epoxy Adhesive 420, Off-White, Part A, 5 Gallon Drum (Pail), 7100001144
Standard Abrasives 712149, Aluminum Oxide Handy Roll, P100 J-weight, 1-1/2 in x 50 yd, 7010295370
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
ACS Diamond Cloth Belt, CX1250 3" X 90" 75U
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
3Mâ„¢ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
3Mâ„¢ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 14502 Scotch-Brite Surface Conditioning Belt, 3/8 in x 13 in, A MED, 7100103026
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105 
