-
×
Standard Abrasives 530205, A/O Resin Fiber Disc, 7 in x 7/8 in 60, 7010310605
25 × $1.29 -
×
3M 00254, Scotch-Brite Clean and Finish Roll, 12" x 30ft, CF-RL, Talc, 7000045859
1 × $345.52 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $409.44 -
×
3M 97841, Value Duct Tape 1900, Silver, 1.88 in x 60 yd, 5.8 mil, 7010375734
24 × $12.04 -
×
3M 14502 Scotch-Brite Surface Conditioning Belt, 3/8 in x 13 in, A MED, 7100103026
20 × $3.56 -
×
3M 49830, Multi-Purpose Duct Tape 3900, Red, 48 mm x 54.8 m, 8.1 mil, 7000144749
24 × $17.21 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 03027, Scotch General Purpose Cloth Duct Tape 393, Silver, 48 mm x 54.8 m, 12 mil, 7000048964
24 × $87.59 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
3M 15938 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 1-1/2 in x 60 in, 7010300824
10 × $28.08 -
×
3M 28214, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 2 in, Die R200P, 7010361116
200 × $1.40 -
×
3M 08857 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 1/2 in x 18 in, 7000028454, 48011088570
20 × $6.57 -
×
3M 15060, Roloc + Button 7, 3/8 in Red, 7000045945
1 × $5.62 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67
3M 51203, Trizact Cloth Belt 307EA, A30 JE-weight, 3 in x 118 in, Film-lok, Full-flex, 7100119733, 50 per case
$25.18
Factory Stock, 7-10 Day Leadtime
3M Trizact Cloth Belt 307EA uses our proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
Controlled Breakdown, Medium Pressure
The abrasive and resin structure for the 3M Trizact Cloth Belt 307EA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. The belt also features a grinding aid that helps prevent heat buildup, warping and discoloration.
The belt is constructed on a durable cloth backing that helps provide control, conformability and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.
Smooth Running, Fine Finish
The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes “chatter marks,” ensures a smooth running belt, and consistent finishing results. When compared to conventional abrasive products, proprietary Trizact abrasives produce a finer finish, achieve results faster, and last longer.
Ideal for Robotic Finishing and Polishing
Robotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M Trizact abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt.
The 3M Trizact Advantage
Unlike conventional abrasives, our line of 3M Trizact belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. 3M Trizact belts can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products.
Three-dimensional structures uniformly distributed over the entire surface of 3M Trizact abrasives ensure consistent performance and eliminate part to part variation.
