-
×
Insize 0213-A500, INFRARED THERMOMETER, -58?F~716?F/-50?C~380?C, 6940561934700
1 × $79.29 -
×
3M 86803, Cubitron II Stikit Film Disc 775L, 120+, 5 in x NH, Linered w/Tab, Die 500X, 7100045865, 250 per case
250 × $1.02 -
×
Insize 6282-0102, BALL POINT, 6928640350672
1 × $6.98
-
×
Insize 7315-50M, WIRELESS DATA TRANSFER SYSTEM, TRANSMITTER, 6940561958201
1 × $127.37
-
×
Insize ISL-B5-900, LINEAR SCALE, 36"/900mm, 6928640322259
1 × $485.23
-
×
3M 33446, Cubitron II File Belt, 80+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033186, 10 belts per carton, 5 cartons per case
5 × $37.73 -
×
Insize ISF-S500-U, DIGITAL SPRING TESTERS, 112lbf, 6940561961362
1 × $4,124.43
-
×
Insize 6527-5, SINE TABLE, 6x6", 6928640347832
1 × $1,652.37
-
×
3M 26119, PPS Series 2.0 Adapter, Type S27, 16 mm Male, 1.5 mm Thread, 7100135925
8 × $27.52 -
×
Insize 8911-20KGF2, WEIGHT _20kg, 6940561907063
1 × $1,540.11
-
×
Insize 3239-13, SHEET METAL MICROMETER, 0-1", type A, 6928640327940
1 × $158.57
-
×
Insize 2151-135, DIGITAL INTERNAL CALIPER GAGE, 4.6-5.4"/115-135mm, 6928640314025
1 × $418.51
-
×
Insize 7382-13, 3-WIRES, .0087"/0.220mm, 6928640361722
1 × $321.46
-
×
Insize 3127-E053, DIGITAL THREE POINTS INTERNAL MICROMETER, .275-.5"/7-13mm, 6928640356483
1 × $2,217.32
-
×
Insize 7341-0S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes),.008-.040", 6928640370854
1 × $33.36
-
×
Insize 3102-100E, DIGITAL OUTSIDE MICROMETER, IP54, 3-4"/75-100mm, 6940561944877
1 × $246.95
-
×
Insize 7341-8S, PIN GAGE HANDLE (with 1pc handle and 4 pairs of collecting bushes), .406-.465", 6928640370632
1 × $44.02
-
×
Insize 2427-17, SPLIT TYPE DIAL BORE GAGE FOR BLIND HOLES, .646-.693", 6928640351426
1 × $280.03
-
×
Insize 8911-10GM1C, WEIGHT , 10g, 6940561907421
1 × $5.55
-
×
Insize 4793-75, 90? FLAT EDGE SQUARE WITH WIDE BASE, 3.0x2.0", 6928640317798
1 × $71.14
-
×
Insize ISL-A1-750, LINEAR SCALE, 30"/750mm, 6928640321825
1 × $649.86
-
×
3M 26046, PPS Series 2.0 Adapter, Type S15, 3/8 Male, 19 Thread BSP, 7100135334
4 × $27.52 -
×
3M 26204, PPS Series 2.0 Lid, Midi/Mini/Micro, 200 Micron Filter, 7100135646
25 × $41.21 -
×
Insize ISF-H20A, MANUAL HORIZONTAL TEST STAND FOR FORCE GAGE, 6940561960433
1 × $864.68
-
×
Insize 4790-3000, 90? BEVELED EDGE SQUARE, 11.8x7.9", grade 0, 6928640317705
1 × $266.01
-
×
Insize 4121-1B1N, AMERICAN STANDARD THREAD RING GAGE, NO GO, 1/4-20UNC, 6928640359217
1 × $62.99
-
×
Insize 6311-5, MICROMETER SETTING STANDARD, 5", 6928640350603
1 × $14.56
-
×
3M 26015, PPS Series 2.0 Adapter, Type S8, 12 mm Male, 1.0 mm Thread, 7100135931
4 × $27.52 -
×
Insize ISL-B5-600, LINEAR SCALE, 24"/600mm, 6928640322198
1 × $395.11
-
×
Insize 7230, SCRIBER, 6928640320064
1 × $6.77
-
×
Insize 4112-BD134, INDIVIDUAL STEEL GAGE BLOCK, .134", grade AS-1, 6928640352812
1 × $25.99
-
×
Insize 4723-300E, BENCH CENTER WITH STRAIGHTNESS MEASUREMENT, 11.811", 6928640358425
1 × $11,130.14
-
×
Insize 1151-450A, DIGITAL HEIGHT GAGE, 0-450mm/0-18?, 6940561979183
1 × $1,197.47
-
×
Insize 7164-1, FLEXIBLE PICK-UP AND FLASHLIGHT, 6940561910759
1 × $16.46
-
×
Insize 7341-13S, PIN GAGE HANDLE (with 1pc handle and 4 pairs of collecting bushes), .704-.760", 6928640360718
1 × $64.73
-
×
Insize 3590-653E, DIGITAL V-ANVIL MICROMETER, 1.4-2"/35-50mm, 3 flutes, 6928640393358
1 × $778.96
-
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $38.92 -
×
3M 20230, Scotch-Seal Metal Sealant 2084, Silver, 5 Gallon Drum (Pail), 7000046344
5 × $209.99 -
×
Insize 3293-061, CAN SEAM MICROMETER, 0-.5", for steel cans, 6928640328497
1 × $140.37
-
×
Insize ISU-T04, TRANSDUCER (for small tube), 6928640371196
1 × $985.98
-
×
Insize ISF-F300, FORCE GAGE, 300N/30kgf, 6928640348792
1 × $282.40
-
×
3M 36866, Surface Protection Material Wall Applicator 36866, 28 in, 1/Case, 7100226306
1 × $1,957.44
-
×
Insize 7330-F8, FLAT BACK, 6928640313349
1 × $2.52
-
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.74
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
