-
×
3M 26105, PPS Series 2.0 Adapter, Type S21, 14 mm Female, 1.0 mm
Thread, 7100135829
1 × $27.52 -
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63 -
×
Insize 3203-33A, OUTSIDE MICROMETER SET W/CASE, 0-3", 6928640327193
1 × $127.37
-
×
Insize 4795-200, 90? BEVELED EDGE SQUARE WITH WIDE BASE, 7.9x5.1", 6928640317941
1 × $215.75
-
×
Insize 4645-3C19, WHITWORTH PIPE THREAD PLUG GAGE(G SERIES), G 3/8 - 19_ GO and NOGO, 6928640375262
1 × $222.68
-
×
Insize 4209-2, LONG HANDLE TELESCOPING GAGE, 1/2 ~ 3/4", 6928640311543
1 × $14.30
-
×
Insize 4112-BD35, INDIVIDUAL STEEL GAGE BLOCK, .35", grade AS-1, 6928640353413
1 × $25.99
-
×
Insize 4646-1H11, BSPT TAPER THREAD PLUG GAGE_1.1/2 - 11 BSPT, 6928640374982
1 × $965.26
-
×
Insize ISH-S30A-BLOCK, HARDNESS TEST BLOCK FOR SHORE DUROMETER, shore A, 6928640325649
1 × $1,730.26
-
×
Insize 4112-A16, INDIVIDUAL STEEL GAGE BLOCK, 16", grade 0, 6928640354090
1 × $864.74
-
×
Insize 3281-8, SCREW THREAD MICROMETER, 7-8", 6928640356209
1 × $414.18
-
×
Insize 4635-1A14, WHITWORTH PIPE THREAD RING GAGE(G SERIES), G 1/2 - 14_ GO, 6928640375361
1 × $250.00
-
×
Insize 6311-20, MICROMETER SETTING STANDARD, 20", 6928640351037
1 × $85.09
-
×
Insize ISP-A5000-DEMO, DEMO SAMPLE, 6928640322693
1 × $108.69
-
×
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
1 × $1,044.21
-
×
3M 26119, PPS Series 2.0 Adapter, Type S27, 16 mm Male, 1.5 mm Thread, 7100135925
4 × $27.52 -
×
Insize 4112-AD1009, INDIVIDUAL STEEL GAGE BLOCK, .1009", grade 0, 6928640351785
1 × $35.18
-
×
Insize ISL-A5-100, LINEAR SCALE, 4"/100mm, 6928640321894
1 × $358.72
-
×
Insize 3127-E065, DIGITAL THREE POINTS INTERNAL MICROMETER, .5-.65"/13-17mm, 6928640356308
1 × $859.55
-
×
Insize 4112-C5, INDIVIDUAL STEEL GAGE BLOCK, 5", grade AS-2, 6928640353932
1 × $97.05
-
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.38
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
