-
×
3M 04297 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Very Fine, 2 in x 132 in, 7010365859
5 × $56.35 -
×
Insize 6224-40E, MINI MAGNETIC STAND, 6928640358210
1 × $127.37 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.91 -
×
Insize 3661-30, HIGH PRECISION NON-ROTATING SPINDLE ELECTRONIC MICROMETERS, 0-30mm/0-1.18", 6940561933833
1 × $969.16
-
×
Insize ISF-F500, FORCE GAGE, 500N/50kgf, 6928640348822
1 × $282.40
-
×
Insize 3280-2, NON ROTATING SPINDLE UNIVERSAL MICROMETER, 1-2", 6928640356162
2 × $473.96
-
×
Insize 3203-1212A, OUTSIDE MICROMETER SET W/CASE, 0-12", 6928640327230
1 × $947.06
-
×
Insize 4112-BD109, INDIVIDUAL STEEL GAGE BLOCK, .109", grade AS-1, 6928640352065
1 × $25.99
-
×
Insize 3101-75E, DIGITAL OUTSIDE MICROMETER, IP65, 2-3"/50-75mm, 6928640326806
1 × $286.80
-
×
3M 29858, Sanding Screen, 80 grit, 12 in x 18 in, 7100161088
20 × $6.77 -
×
Insize 4120-3N, METRIC THREAD RING GAGE, NO GO, M3x0.5, 6928640341687
1 × $61.43
-
×
Insize 3264-06, MICROMETERS FOR HOT PLATE, 0-.6", 6940561943269
1 × $538.08
-
×
Insize 4112-AD143, INDIVIDUAL STEEL GAGE BLOCK, .143", grade 0, 6928640353079
1 × $35.18
-
×
Insize 4131-1A2, AMERICAN STANDARD THREAD PLUG GAGE, 1/2-20UNF, 6928640359026
1 × $101.38
-
×
Insize 3108-3, DIGITAL OUTSIDE MICROMETER, IP65, 2-3"/50-75mm, 6928640326943
1 × $234.82
-
×
Insize 4130-33, METRIC THREAD PLUG GAGE, M33x3.5, 6928640340154
1 × $88.38
-
×
Insize 4707-200, MACHINIST SQUARE WITH WIDE BASE, 8x5", 6928640317996
1 × $57.88
-
×
Insize 2187-38, ADJUSTABLE SNAP GAGE, 1.26-1.50", 6928640314414
1 × $161.16
-
×
Insize 1120-200AWL, DIGITAL INSIDE GROOVE CALIPER, .98-8"/25-200mm, built-in wireless, 6928640384776
1 × $343.13
-
×
Insize 7382-113, 3-WIRES, .0433"/1.100mm, 6928640361821
1 × $321.46
-
×
Insize 4112-B3, INDIVIDUAL STEEL GAGE BLOCK, 3", grade AS-1, 6928640353864
1 × $66.72
-
×
Insize 4797-100, PROTRACTOR, 3.9x5.9", 10-170?, 6928640317446
1 × $52.68
-
×
Insize 6867-250E, GRANITE DIAL INDICATOR STAND, 6928640358241
1 × $1,410.63
-
×
Insize 4001-B, BASE FOR CYLINDER GAGE BLOCK, supplied in pair, 6928640379567
1 × $311.93
-
×
Insize 6881-A3, GAGE BLOCK ACCESSORY, holder, 2-4", 6928640316012
1 × $231.35
-
×
Insize 4788-400E, BENCH CENTER, 6928640358364
1 × $8,301.27
-
×
Insize ISP-A3000-RTABLE, ROTARY TABLE, 6928640322846
1 × $1,378.05
-
×
Insize 4001-16E, CYLINDER GAGE BLOCK, 16", 6928640358807
1 × $1,436.62
-
×
Insize 8911-100MGF1S, WEIGHT _100mg, 6940561906677
1 × $11.45
-
×
Insize 4728-360, VERTICAL BENCH CENTER, 6940561951899
1 × $13,803.75
-
×
Insize 2435-E608, BORE GAGES, measuring depth 120", range 1.4-2.4", 6940561979879
1 × $8,389.61
-
×
Insize ISD-VMM225, TOOLMAKER MICROSCOPES, binocular, 6940561940381
1 × $34,027.05
-
×
Insize 3566-50CA, ELECTRONIC CRIMP HEIGHT MICROMETER,25-50mm/1-2", 0.001mm/.00005", 6940561965919
1 × $517.29
-
×
3M 16066, PPS Mix Ratio Inserts, Mini (6 fl oz), 7000120511
50 × $27.41 -
×
Insize 3227-E1, THREE POINTS INTERNAL MICROMETER, .8-1", 6928640328947
1 × $553.68
-
×
Insize 3128-12, DIGITAL WIDE RANGE THREE POINTS INTERNAL MICROMETER, 8-12"/203-305mm, 6928640356704
1 × $5,849.59
-
×
Insize 7382-11, 3-WIRES, .0067"/0.170mm, 6928640361708
1 × $321.46
-
×
Insize 4707-1000, MACHINIST SQUARE WITH WIDE BASE, 39x22", 6928640318078
1 × $626.46
-
×
Insize 3590-255E, DIGITAL V-ANVIL MICROMETER, .2-1.0"/5-25mm, 5 flutes, 6940561947892
1 × $628.20
-
×
Insize 3661-55, HIGH PRECISION NON-ROTATING SPINDLE ELECTRONIC MICROMETERS,25-55mm/.98-2.17", 6940561933840
1 × $1,104.71
-
×
Insize 4112-CD109, INDIVIDUAL STEEL GAGE BLOCK, .109", grade AS-2, 6928640352072
1 × $20.62
-
×
Insize 3101-44E, DIGITAL OUTSIDE MICROMETER, IP65, 0-4"/0-100mm, 6928640326905
1 × $1,220.87
-
×
Insize 4797-200, PROTRACTOR, 7.9x15.7", 10-170?, 6928640317460
1 × $76.94
-
×
Insize 3127-E6, DIGITAL THREE POINTS INTERNAL MICROMETER, 5-6"/127-152mm, 6928640356414
1 × $1,354.30
-
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $27.52 -
×
Insize 6202-100, MAGNETIC STAND, 6928640313486
1 × $86.21
-
×
Insize 4120-27, METRIC THREAD RING GAGE, GO, M27x3, 6928640341540
1 × $90.98
-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.74
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
