-
×
3M 66619, Cloth Belt 341D, 50 X-weight, 4 in x 24 in, Fabri-lok, Single-flex, 7010360692, 25 per case
25 × $6.29 -
×
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
1 × $52.38 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Insize 6313-1H16, SETTING RING, 1/16" dia, 6928640357367
1 × $500.82 -
×
Insize 7382-14, 3-WIRES, .0098"/0.250mm, 6928640361739
1 × $321.46
-
×
Insize 4922-100, HANDY LEVEL, 4", 6974029775222
1 × $19.50
-
×
Insize 5106-M50T, ZOOM STEREO MICROSCOPE (with universal stand, trinocular), 6940561960402
1 × $2,703.69
-
×
Insize 3566-100CA, ELECTRONIC CRIMP HEIGHT MICROMETER, 75-100mm/3-4", 0.001mm/.00005", 6940561965933
1 × $590.94
-
×
Insize 5003-1E, 3-PIECE MEASURING TOOL SET, 6928640330230
1 × $117.84
-
×
Insize 5102-M600BD-U, METALLURGICAL MICROSCOPE, bright & dark field objectives, 6940561905649
1 × $9,964.63
-
×
Dynabrade 97570 1/2" NPT Female Safety Coupler
1 × $36.69 -
×
Insize 4792-150, 90? FLAT EDGE SQUARE WITH WIDE BASE, 5.9x3.9", 6928640317880
1 × $141.24
-
×
Dynabrade 77769 5" Dia. x 7/8" Center Holes, 80 Grit, Z/A, Type 27, DynaCut Flap Disc w/Fiberglass, 10/pack
10 × $5.82 -
×
Insize 4634-38, NPT THREAD RING GAGE, 3x8NPT, 6928640347054
1 × $830.09
-
×
Insize ISM-ZS50-EPD10X, EYEPIECE, 10X dividing eyepiece (0.1mm/.004"), 6928640323089
1 × $196.03
-
×
Insize 3203-8A, OUTSIDE MICROMETER, 7-8", 6928640327148
1 × $108.31
-
×
Insize 3127-E028, DIGITAL TWO POINTS INTERNAL MICROMETER, .24-.28/6-7mm, 6940561954524
1 × $918.47
-
×
Insize 6535-25, ADJUSTABLE ANGLE BLOCK, 3.0x1.0x1.4", 6928640320927
1 × $339.66
-
×
Insize 4791-1501, 90? FLAT EDGE SQUARE (DIN875 grade 1), 5.9_3.9", 6940561964561
1 × $38.90
-
×
Insize 6900-A23, GRANITE SURFACE PLATE, 24x36x4", grade A, 6928640359507
1 × $1,567.28
-
×
Insize 1183-300A, DIGITAL POINT CALIPER, 0-12"/0-300mm, 6928640378058
1 × $307.60
-
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.64
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
