-
×
Dynabrade 92210 1/8" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.02 -
×
Norton 66254414832 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 5am U2305, 40 Each
40 × $11.50 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
3M 02405, Utility Cloth Sheet 211K, 9 in x 11 in 220 J-weight, 7010299775
250 × $2.73 -
×
3M 05009, Utility Cloth Roll 211K, 100 J-weight, 1 in x 50 yd, Full-flex, 7100016843
5 × $64.59 -
×
3M 05027, Utility Cloth Roll 211K, 150 J-weight, 1-1/2 in x 50 yd, Full-flex, 7100031693
10 × $90.19 -
×
3M 19766, Utility Cloth Sheet 314D, 9 in x 11 in P240 J-weight, 7000000354
50 × $1.57 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
2 × $28,988.00 -
×
3M 10455, Cloth Sheet 481W, 220, 9 in x 11 in, 7010294811
25 × $4.01 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
2 × $1,245.00 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Standard Abrasives 714179, Aluminum Oxide Handy Roll, P240 J-weight, 1-1/2 in x 50 yd, 7100050575
1 × $41.26 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
2 × $18,352.22 -
×
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
250 × $1.57 -
×
Norton 66261127733 - 2" X 50 Yard 60 Grit Metalite™ Aluminum Oxide Cloth Roll, 1 Each
1 × $69.86 -
×
Insize ISL-A5-650, LINEAR SCALE, 26"/650mm, 6928640322006
1 × $395.11 -
×
Insize 1520-150P, DIGITAL INSIDE GROOVE CALIPER, .56-6"/14-150mm, IP67 dust/waterproof, no data output, 6928640387418
1 × $588.34
-
×
Insize 4162-2251, PIN GAGE SET. 250pcs, .251" ~.500", 6928640380259
1 × $341.39
-
×
Insize 4112-C5, INDIVIDUAL STEEL GAGE BLOCK, 5", grade AS-2, 6928640353932
1 × $97.05
-
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.66
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
