-
×
3M 11102, Scotch Box Sealing Tape Hand Dispenser H123, 3 in, 6/Case, 7100033784
6 × $70.33 -
×
Insize 3521-80, DIGITAL TUBULAR INSIDE MICROMETERS, 6-80", 6940561981995
1 × $1,961.70
-
×
Insize 4002-15, ANGLE GAGE BLOCK, 15pcs/set, 6928640316371
1 × $5,781.14
-
×
3M 45014, Diamond Grade DG3 Reflective Digital Sheeting 4090UDS, White, 30 in x 50 yd, 1 Roll/Case, 7100282804
1 × $1,962.81
-
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.80 -
×
Insize 3227-E10, THREE POINTS INTERNAL MICROMETER, 9-10", 6928640356582
1 × $1,641.97
-
×
Insize 4707-600, MACHINIST SQUARE WITH WIDE BASE, 24x14", 6928640318047
1 × $311.07
-
×
Insize 1120-500, DIGITAL INSIDE GROOVE CALIPER, 1.57-20"/40-500mm, 6940561961034
1 × $871.68
-
×
Insize ISD-V250A, VISION MEASURING SYSTEM,With Computer, 10_6_8", 6928640384974
1 × $15,142.97
-
×
Insize 7381-T15, MEASURING TIPS FOR SCREW THREAD MICROMETER, 8-5TPI/ 3.5-5mm, 6928640306785
1 × $27.29
-
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $38.92 -
×
Insize 4906-200, FRAME LEVEL, 8_8", 6928640324970
1 × $1,603.08
-
×
Insize 4112-BD133, INDIVIDUAL STEEL GAGE BLOCK, .133", grade AS-1, 6928640352782
1 × $25.99
-
×
Insize ISHR-T300-U, AUTOMATIC DIGITAL ROCKWELL
HARDNESS TESTER (DOLPHIN-NOSE MODEL), 6928640380242
1 × $22,898.85
-
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.74 -
×
Insize 4112-CD75, INDIVIDUAL STEEL GAGE BLOCK, .75", grade AS-2, 6928640353666
1 × $25.99
-
×
Insize 6311-20, MICROMETER SETTING STANDARD, 20", 6928640351037
1 × $85.09
-
×
Insize 4162-2251, PIN GAGE SET. 250pcs, .251" ~.500", 6928640380259
1 × $341.39
-
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
