-
×
3M 66619, Cloth Belt 341D, 50 X-weight, 4 in x 24 in, Fabri-lok, Single-flex, 7010360692, 25 per case
25 × $6.29 -
×
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
1 × $52.38 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Insize 6313-1H16, SETTING RING, 1/16" dia, 6928640357367
1 × $500.82 -
×
Insize 2132-20, DIGITAL EXTERNAL CALIPER GAGE, 0-.8"/0-20mm, 6928640314032
1 × $421.97
-
×
Insize 4112-AD111, INDIVIDUAL STEEL GAGE BLOCK, .111", grade 0, 6928640352119
1 × $35.18
-
×
Insize 7382-16, 3-WIRES, .0132"/0.335mm, 6928640361753
1 × $321.46
-
×
3M 20930, PSA Cloth Disc 348D, P120 X-weight, 1 in x NH, Die 100N, 7000118916
500 × $0.44 -
×
Insize IST-DTT10, DIGITAL TORQUE TESTERS, 88.5lbf.in/7.38lbf.ft, 6940561942170
1 × $3,327.69
-
×
Insize 3521-80, DIGITAL TUBULAR INSIDE MICROMETERS, 6-80", 6940561981995
1 × $1,961.70
-
×
Insize 3351-175WL, HIGH PRECISION DIGITAL MICROMETERS/SNAP GAGE (built-in wireless), 150-175mm/6-7", 6940561967005
1 × $1,344.77
-
×
Insize 3583-25AE, DIGITAL JAW TYPE MICROMETERS, 0-1"/0-25mm, 6940561981889
1 × $437.57
-
×
Insize 4788-D6E, BENCH CENTER, Distance between
two centers 23.622", Low accuracy, 6928640383243
1 × $9,349.36
-
×
Insize 4771-40, SHANK RUNOUT TESTER, taper CAT40, 6940561952353
1 × $7,536.62
-
×
Insize 4920-1000, ALUMINUM ALLOY LEVEL (WITH ROTARY VIAL), 40", 6940561980189
1 × $61.30
-
×
Insize 7331-M1, MAGNETIC BACK FOR DIGITAL/DIAL INDICATORS_2.028" DIA, 6928640376344
1 × $25.82
-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
