-
×
Insize 1135-601, DIGITAL CALIPER, 0-24"/0-600mm, 6928640301643
1 × $776.36 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.74 -
×
3M 49456, EMI Aluminum Foil Shielding Tape 1170, 2 in x 18 yd, 1170-2"X18YD, 7000132702
5 × $194.90 -
×
Insize 0130-L110, LIGHT METER (BASIC TYPE), 6974029776564
1 × $65.70
-
×
Insize ISGF-0901, PRECISION SCREWDRIVE SET, 6928640387135
1 × $9.69
-
×
Insize 2276-300, COMBINATION SQUARE, 6928640376450
1 × $19.50
-
×
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
1 × $1,044.21
-
×
Insize 6883-5, GAGE BLOCK HOLDER, .8-1", 6928640348419
1 × $23.05
-
×
Insize 8911-5KGF1S, WEIGHT_5kg, 6940561906813
1 × $493.96
-
×
3M 45019, Diamond Grade DG3 Reflective Digital Sheeting 4081UDS, Fluorescent Yellow, 36 in x 50 yd, 1 Roll/Case, 7100282389
1 × $2,446.58
-
×
Insize 7360-1, ZEROING FOOT SWITCH, 6940561952476
1 × $78.68
-
×
3M 86802, Cubitron II Stikit Film Disc 775L, 80+, 5 in x NH, Linered w/Tab, Die 500X, 7100048736, 250 per case
250 × $1.22 -
×
Insize 6329-BT50, TAPER PLUG GAGE, 6940561952018
1 × $285.07
-
×
3M 65488, Pro Grade Precision Ultra Durable Universal Hole Sanding Disc, DUH5100TRI-10I, 5 inch UH, 100, 7100202876, 10 per pack
9 × $7.95 -
×
Insize 8911-100GF1S, WEIGHT_100g, 6940561906769
1 × $46.97
-
×
Insize 6888-1, ROLLER BEARING V-BLOCK SET, 5.9x2.4x3.9", pair, 6928640320767
1 × $834.42
-
×
Insize ISH-TDV1000A-B, DIGITAL MICRO-VICKERS HARDNESS TESTER, 6940561949384
1 × $21,580.97
-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
