-
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
3M 45188, Stikit Disc Hand Pad, 5 in x 1/8 in, 7100015524
20 × $7.80 -
×
3M 83497, Hookit Marine Fairing Board, Rigid, 4 1/2 in x 30 in, 7000045684
1 × $87.91 -
×
3M 87147, PSA Cloth Disc 777F, 5 x NH, 36 YF-weightt, 7010308524
250 × $3.30 -
×
Standard Abrasives 726070, A/O C2 Straight Precision Cartridge Roll, 5/8 in x 2-1/2 in x 1/4 in 60, 7100098797
25 × $4.95 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.80 -
×
3M 29834, Sanding Screen, 100 Grit, 18 in x NH, 7100160819
12 × $7.56 -
×
Insize ISH-SPHA-DL, IMPACT DEVICE DL, 6928640325199
1 × $4,083.67 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.45 -
×
3M 29837, Sanding Screen, 180 Grit, 17 in x NH, 7100160762
12 × $5.83 -
×
3M 45336, Impact Stripping Tape 528, Tan, 4 in x 20 yd, 82 mil, 2 rolls per case, 7100084362
2 × $238.64
-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.69 -
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $551.38 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 79447 6" x 9" DynaBrite General Purpose Maroon Hand Pad, 60/Box
60 × $82.92 -
×
3M 50728, Hookit Purple+ Curved Adapter Set Multi Hole, 70 mm x 127 mm, 7000032209
1 × $125.74 -
×
Insize ISH-SPHA-DC, IMPACT DEVICE DC, 6928640325168
1 × $1,297.50
-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.62
3M 27628, Flange Adapter 6 in Radial Bristle Brush Set, 2 in x 1 in, 7000028515
$6.81
Factory Stock, 7-10 Day Leadtime
3M Flange Adapter holds together a minimum of seven 6 inch radial bristle discs for use on bench motors with a shaft size of 1 inch diameter.
For bench motors with shafts smaller than 1 inch, a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 1/2 inch, 5/8 inch, 3/4 inch or 7/8 inch shafts. When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.
