-
×
3M 87179, Scotch-Weld Epoxy Adhesive 2216NS, Tan, Part B, 5 Gallon Drum (Pail), 7010309882
5 × $519.53 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3 × $80.58 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
45 × $9.52 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
400 × $1.39
-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
1000 × $0.60 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,639.98 -
×
Dynabrade 82470 5" Dia. x 180 Grit, A/O, Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $0.98 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $871.15 -
×
3M 88869, PSA Cloth Disc 777F, 36 YF-weight, 12 in x NH, Die 1200B, 7000120240
10 × $18.06 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
2 × $9.18 -
×
Dynabrade 78176 2" Dia. Medium NWN VT DynaBrite TR Locking-Type Disc, 25/pack
25 × $1.84 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33
3M 23095, Scotch-Brite Between Coats Disc 8447, 17 in, Maroon Very Fine, 7000126205
$9.51
Factory Stock, 7-10 Day Leadtime
Strips fasten to pads by hooking into the pad for positive driving without danger of adhesive transfer. Conforms to uneven surfaces. Powders most dry finishes, reduces swirl marks and grain raise. Use on water-based, solvent-based finishes.
3M Resinite Floor Surfacing Discs are precut. Sharp, fast cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
