-
×
3M 01708, Scotch-Brite SST Deburring Wheel, ST-WL, 8S Fine, 8 in x 2 in x 3 in, 7000144590
2 × $251.94 -
×
3M 04028, Scotch-Brite Hand Pad 7448, HP-HP, SiC Ultra Fine, Gray, 6 in x 9 in, 7100089226, 60/case
1 × $88.64 -
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.77 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.30 -
×
3M 87052, Cubitron II Stikit Film Disc 775L, 180+, 6 in x NH, Linered w/Tab, Die 600Z, 7100075206, 250 per case
250 × $1.36 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.69 -
×
Dynabrade 78101 2" Dia. x 80 Grit A/Z DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $1.90 -
×
Dynabrade 78402 2" Dia. x 1/2", Dyna Premium Rapid Strip TR Disc, 25/pack
25 × $7.54 -
×
Dynabrade 78763 2" Dia. x 2" W x 1/4" Shank, Coarse, NWN DynaBrite Wheel, 10/pack
10 × $135.90 -
×
3M 06840, Booth Coating, 5 gal, 7000120531
1 × $485.96 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.69 -
×
3M 05791, Hookit Pad, 7000028382
20 × $19.24 -
×
Standard Abrasives 705819, A/O Straight Cartridge Roll, 5/16 in x 1-1/2 in x 1/8 in 80, 7100085866
100 × $0.47 -
×
3M 26135, PPS Series 2.0 Adapter, Type S40, Trapezoidal Thread, 7100135335
4 × $25.96 -
×
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
1 × $25.96 -
×
Standard Abrasives 707620, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 120, 7100080011
100 × $0.36 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $1.01
3M 22970, Disc Holder Adapter 9, 5/8-11 External 3/8-24 Internal, 7000046093
$15.19
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
