-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.62 -
×
3M 35829, Hookit Dust Extraction Flexible Sanding Block Kit, 7100259119
10 × $100.94 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
24 × $3.79 -
×
3M 10115, Synthetic Steel Wool Pads, #3 Coarse, 7000051986
18 × $2.69 -
×
3M 16553, Scotch-Brite Extra Duty Hand Pad 6444, 6 in x 9 in, 7000028548, 60/Case
1 × $104.31 -
×
3M 06506, Scotch Steel Gray Masking Paper, 06506, 6 in x 1000 ft, 6 per case, 7000045440
6 × $45.82 -
×
3M 26006, PPS Series 2.0 Adapter, Type S5, 12 mm Male, 1.5 mm Thread, 7100135831
1 × $25.96 -
×
3M 34425, General Purpose Sanding Sponge CP041-3PK, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Medium, 7100175218, 3/pack
6 × $9.17 -
×
3M 33034, Perfect-It 1-Step Foam Finishing Pad, 33034, 6 in, Quick Connect, 6 per case, 7100191413
6 × $27.68 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $1.01 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $34.73 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.38
3M 22970, Disc Holder Adapter 9, 5/8-11 External 3/8-24 Internal, 7000046093
$15.19
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
