-
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
2 × $2,022.00 -
×
Insize 3205-56, OUTSIDE MICROMETER WITH EXTENSION ANVIL COLLAR, 48-56", 6928640327476
1 × $2,775.33 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
2 × $18,352.22 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.87 -
×
3M 87260, Scotch-Weld Epoxy Adhesive DP100, Clear, 200 mL Duo-Pak, 7100075490, 12/case
12 × $87.87 -
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $25.96 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
Dynabrade 25234 Vane Set (4pk)
1 × $28.26 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
3M 08019, Marine Grade Silicone Sealant, Clear, 3 oz Tube, 7000120480, 6/Case
6 × $15.76 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.69
3M 22970, Disc Holder Adapter 9, 5/8-11 External 3/8-24 Internal, 7000046093
$15.19
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
