-
×
3M 87179, Scotch-Weld Epoxy Adhesive 2216NS, Tan, Part B, 5 Gallon Drum (Pail), 7010309882
5 × $526.43 -
×
Insize 3205-72, OUTSIDE MICROMETER WITH EXTENSION ANVIL COLLAR, 64-72", 6928640327490
1 × $3,195.57 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $522.56 -
×
Dynabrade 78318 2" Dia. x 1" W x 1/4" Shank, Very Fine, NWN DynaBrite Wheel, 10/pack
10 × $13.39 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.76 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.38 -
×
Insize 0213-A500, INFRARED THERMOMETER, -58?F~716?F/-50?C~380?C, 6940561934700
1 × $79.29
-
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $34.73 -
×
Insize 6301, MICROMETER STAND, 6928640307300
1 × $38.90
-
×
Standard Abrasives 708617, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 100, 7100080012
100 × $0.42 -
×
3M 03738, Scotch-Brite Cut and Polish Unitized Wheel, CP-UW, 7A Medium, 3 in x 3/4 in x 3/8 in, 7010364917
10 × $26.81 -
×
3M 33446, Cubitron II File Belt, 80+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033186, 10 belts per carton, 5 cartons per case
5 × $35.59 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 26118, PPS Series 2.0 Adapter, Type S26, 11 mm Male, 1.0 mm Thread, 7100135924
4 × $25.96 -
×
Insize 3101-175E, DIGITAL OUTSIDE MICROMETER, IP65, 6-7"/150-175mm, 6928640326844
1 × $411.58
-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.69 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.55
3M 22970, Disc Holder Adapter 9, 5/8-11 External 3/8-24 Internal, 7000046093
$15.19
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
