-
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.80 -
×
Standard Abrasives 269201, Cross Buff Mandrel, 4 in x 1/4 in Shank x 1/4"-20F, 7010368742
1 × $10.61 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Standard Abrasives 725013, Buff and Blend Cross Buff HP, A/O VFN, 1-1/2 in x 1/2 in x 2 Ply x 8-32, 7000046831
50 × $4.90 -
×
Standard Abrasives 265006, Buff and Blend Cross Buff HS, A/O Medium, 3/4 in x 3/8 in x 2 Ply x 8-32, 7010330373
10 × $1.61 -
×
3M 91004, Drywall Sanding Sponge CP-042-4PK, Single Angle, 4-7/8 in x 2-7/8 in x 1 in, Fine, 7100111452, 4/pack
6 × $5.94 -
×
3M 10118, Synthetic Steel Wool Pads, 10118NA, #0 Fine, 7000126148
18 × $2.69 -
×
3M 05689, Hookit Sanding Block Round, 1-1/4 in X 10-3/4, 7000119962
24 × $27.41 -
×
Insize 4901-8, BLOCK LEVEL, 8", 6928640373879
1 × $261.68 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
3M 88903, PSA Cloth Disc 348D, 60 X-weight, 12 in x NH, Die 1200B, 7000118896
10 × $8.03 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.60 -
×
3M 94734, Cubitron ll Cloth Belt 947A, 80+ X-weight, 3-1/2 in x 15-1/2 in, Fabri-lok, Single-flex, 7100093313, 50 per case
50 × $7.46 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.99
3M 22970, Disc Holder Adapter 9, 5/8-11 External 3/8-24 Internal, 7000046093
$15.19
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
