-
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
2 × $388.51 -
×
3M 29850, Sanding Screen, 120 Grit, 15 in x NH, 7100160830
12 × $4.47 -
×
3M 29844, Sanding Screen, 120 Grit, 16 in x NH, 7100160823
12 × $5.17 -
×
3M 15145 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 1 in x 132 in, 7010364529
5 × $32.81 -
×
Dynabrade 51332 .7 hp Router, 3-1/2" Base, Central Vacuum, 20,000 RPM, 1/4 Collet
1 × $1,277.00 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
3M 27359, Cloth Belt 970DZ, 24 YN-weight, 25 in x 75 in, Film-lok, Single-flex, 7010361224, 2 per case
2 × $206.61 -
×
3M 18451, Scotch-Brite Heavy Duty Hand Pad 7440B, HP-HP, A/O Medium, 6 in x 9 in, 7000000715, 40 ea/Case
1 × $144.85 -
×
Air Turbine Tools 310RDM - 1/4" Router Hand Tool Series, 25,000RPM, 33422
1 × $950.00 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
3M 28758, Cubitron II Cut and Grind Wheel, T27, 6 in x 1/8 in x 7/8 in, 7100019067, 20 per case
20 × $15.24 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 125U
2 × $171.30 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.69
3M 22970, Disc Holder Adapter 9, 5/8-11 External 3/8-24 Internal, 7000046093
$15.19
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
