-
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Standard Abrasives 725007, Buff and Blend Cross Buff HS, A/O Medium, 1 in x 3/8 in x 2 Ply x 8-32, 7000046828
50 × $3.25 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
3M 54343, Particulate Respirator 8511, N95, 7000002056, 80 EA/Case
1 × $195.42 -
×
3M 05208, Hookit Sanding Block D/F, 70MM x 198MM, 7000028311
5 × $123.70 -
×
3M 10115, Synthetic Steel Wool Pads, #3 Coarse, 7000051986
18 × $2.69 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.78 -
×
3M 15058, Scotch Electrical Shielding Tape 24, 1 in x 100 ft (25 mm x 30,5 m), 7100005805
10 × $227.65 -
×
3M 14502 Scotch-Brite Surface Conditioning Belt, 3/8 in x 13 in, A MED, 7100103026
20 × $3.69 -
×
3M 26125, PPS Series 2.0 Adapter, Type S29, 8 mm Male, 1.25 mm Thread, 7100135955
1 × $25.96 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15 -
×
3M 62795, Polyurethane Adhesive Sealant 550FC Fast Cure, Black, 310 mL Cartridge, 7100001803, 12/Case
12 × $11.11 -
×
Dynabrade 69522 Housing for 69500, 5,000 RPM
1 × $77.04 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.26 -
×
3M 29831, Sanding Screen, 180 Grit, 18 in x NH, 7100160238
12 × $5.83 -
×
3M 29902, Sanding Screen, 150 Grit, 12 in x 18 in, 7100160763
20 × $4.84 -
×
3M 35828, Hookit Dust Extraction Flexible Sanding Block, 406 mm x 67 mm, 7100256624
8 × $66.54 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.69 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.69
3M 22970, Disc Holder Adapter 9, 5/8-11 External 3/8-24 Internal, 7000046093
$15.19
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
