-
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 43474, Glass Cloth Tape 3615, White, 1 in x 36 yd, 7 mil, 7000048876
36 × $49.66 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 06970, Scotch Polyethylene Coated Cloth Tape 390, Olive, 48 mm x 54.8 m, 11.7 mil, 7000048963
648 × $130.27 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 53915, Performance Plus Duct Tape 8979N (Nuclear), Red, 72 mm x 54.8 m, 12.1 mil, 7010334653
12 × $50.09 -
×
3M 93947, Scotch Stucco Tape 3260-A, 1.88 in x 60 yd (48 mm x 54.8 m), Stucco Tape, 7010384961
12 × $6.60 -
×
3M 97841, Value Duct Tape 1900, Silver, 1.88 in x 60 yd, 5.8 mil, 7010375734
24 × $12.04 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33
3M 20439, HOOK AND LOOP DISC FACE PLATE, 20439, 7 IN EXTRA HARD, 7010360099
$37.59
Factory Stock, 7-10 Day Leadtime
3M Hook and Loop Disc Face Plate backs a 7? Hook and Loop disc (sold separately) to provide support required for surface conditioning or finishing applications. It is used in conjunction with a disc pad hub (sold separately), which attaches to the power tool and is held into place along with the appropriate disc using a disc retainer nut (sold separately).
Surface Conditioning and Finishing
3M Disc Pad Face Plates can be easily changed by removing the disc pad face plate from the disc pad hub; which enable the operator to use a single tool for multiple applications from grinding to finishing a work piece. Specifically, this 3M Hook and Loop Disc Face Plate was designed for Hook and Loop discs, typically used for surface conditioning or finishing. This disc pad face plate allows the end user to use the same tool, disc pad hub, and retainer nut, while quickly changing from grinding applications using fiber discs to surface conditioning applications using hook and loop discs, simply by changing the disc pad face plate at the same time as the abrasive product change.
