-
×
Dynabrade 01794 Rubber Drive Wheel
1 × $279.95 -
×
3M 15095, Scotch Heavy Duty Masking Tape 2020+-48TP6, 1.88 in x 60.1 yd (48mm x55m), 6 rolls/pack, 7100191056
4 × $22.27 -
×
Dynabrade 52574 4" (102 mm) Dia. Straight-Line Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 18,000 RPM, 3/8"-24 Spindle
2 × $603.51 -
×
Dynabrade 56826 6" Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander, 3/16" Orbit
5 × $255.77 -
×
Dynabrade 56180 5" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
1 × $24.26 -
×
Dynabrade 79517 1/2" W x 18" L Premium Medium Plus NWN DynaBrite Belt, 10/pack
10 × $7.86 -
×
Dynabrade 92116 1/2" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.20 -
×
Dynabrade 54947 Spring, Throttle Ball
2 × $4.28
-
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $431.21 -
×
Dynabrade 50296 5" Dia. Disc Backup Pad, Hard Density, 5/8"-11 Thread
1 × $34.17 -
×
Dynabrade 79109 1/2" W x 12" L 80 Grit DynaCut Premium Ceramic Belts, 50/pack
50 × $2.89 -
×
Dynabrade 15029 Contact Arm Ass'y, 1" Dia. x 3/8" W, Tapered Rubber Wheel, No Platen/Offset Design
1 × $95.94 -
×
3M 20928, PSA Cloth Disc 348D, P180 X-weight, 1 in x NH, Die 100N, 7000118917
500 × $0.40 -
×
3M 76625, Roloc Disc 777F, 80 YF-weight, TR, 1 in, Die R100N, 7000045621
500 × $0.62 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
Dynabrade 11218 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, with 1/2" W Platen
1 × $69.58 -
×
3M 20930, PSA Cloth Disc 348D, P120 X-weight, 1 in x NH, Die 100N, 7000118916
500 × $0.39 -
×
3M 69602, Cloth Belt 777F, 60 YF-weight, 1 in x 11 in, Sine-lok, Full-flex, 7010295223, 500 per case
500 × $1.05 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
Dynabrade 15003 Mini-Dynafile II Abrasive Belt Tool
1 × $680.48 -
×
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
200 × $2.14 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $688.35 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73
3M 09305, Regalite Floor Surfacing Discs, 6-7/8 in x 7/8 in, 752I, P100 Grit, 7010384130, 200/case
$0.79
Factory Stock, 7-10 Day Leadtime
3M floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite mineral, and tough paper backing.
3M Resinite Floor Surfacing Discs are precut. Sharp, fast cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
